The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing ...

http://http://www.sunbopump.com/Slurry-Pumps/HS-HHS-SL-MS-Series-Slurry-Pumps-for-Mining-120.html

ZJ series slurry pump is a type of single-stage, single-suction, horizontal, cantilevered, centrifugal slurry pump. The ZJ series pumps used international advanced solid-liquid two-phase flow theory and designed using the Minimum-Wear principle. ZJ series slurry pumps are widely used in mining ,metallurgy, power ,coalpetroleum, chemical and buildin ...

http://http://www.sunbopump.com/Slurry-Pumps/ZJ-Trash-Slurry-Pumps-121.html

ZGB(P) slurry pumps is horizontal cantilever single-stage, single-suction, double-case and high head of delivery centrifugal slurry pump. Series ZGB(P) UP-to-date generation Slurry Pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture. The series of pump has the advantages of r ...

http://http://www.sunbopump.com/Slurry-Pumps/ZGB-High-performance-Slurry-Pumps-122.html

The SF Froth Pump is of heavy duty construction, designed for continuous pumping of highly abrasive and corrosive frothy slurries. It has a vertical shaft configuration and comprise a hopper, with vertical Bearing Assembly, and Type 'HS' pump wet-end. It features a wide choice of replaceable abrasion resistant metal or moulded rubber casing liners ...

http://http://www.sunbopump.com/Froth-Pump/Vertical-Froth-Pump-flotation-minerals-processing-Pump-123.html

The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement w ...

http://http://www.sunbopump.com/Sump-Pump/Vertical-Submerged-Slurry-Pump-125.html

OEM business is an important part of our business. Sunbo accept OEM business as samples or drawings of all kinds of pumps and casting spare parts. And more we offer ODM service too.   We are experienced in anti-abrasion and anti-corrosion material spare parts business. The main material specifications as below:       &nb ...

http://http://www.sunbopump.com/Other-Pumps/OEM-Pumps-129.html

Impeller is a rotor, rotating component of a centrifugal pump. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. It increa ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Metal-Impeller-Wear-Parts-135.html

Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in mineral processing and all other solid mixture applications.  All Sunbo Pump aftermarket slurry pump parts save you money and energy of your slurry pump parts ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Expeller-Ring-Metal-Wear-Parts-136.html

A volute Liner is a curved funnel increasing in area to the discharge port. It is often used with impeller pumps. As the area of the cross-section increases, the volute reduces the speed of the liquid and increases the pressure of the liquid. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the pump. Ma ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Volute-Liner-138.html

Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.   Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in miner ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Throatbush-139.html

  Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in mineral processing and all other solid mixture applications.  All Sunbo Pump aftermarket slurry pump parts save you money and energy of your slurry pu ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Frame-Plate-Liner-Insert-140.html

Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Cover Plate is the suction end of slurry pump head part. It's the outer shell of the radial subdivision, and combined with Frame plate together make up to the whole pump body.Pump cover is under pressure ...

http://http://www.sunbopump.com/Other-Pump-Parts/Pump-Body-Cover-Plate-Frame-Plate-145.html

The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing ...

http://http://www.sunbopump.com/Slurry-Pumps/Metal-Lined-Slurry-Pumps-148.html

Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the wear parts material. The wear parts are made of material natural Rubber SR26, SR55, SR33. And more, OEM material is available, eg. SR08, SS42, SS10, SS12, SS01, SS02, SS21,S S31, SU01...etc, to so ...

http://http://www.sunbopump.com/Slurry-Pumps/Rubber-Lined-Slurry-Pump-150.html

Specification:   Capacity (m3/h): 12.6-28.8 Head (m): 6-68 Speed (r/min): 1200-3800 Max. Efficiency  N-n%: 40 NPSH (m): 2-4 Allowable Max. Power (Kw): 15   Description:   The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted ...

http://http://www.sunbopump.com/Slurry-Pumps/1.5x1-Horizontal-Slurry-pump-Mining-Pump-160.html

Specification:   Capacity (m3/h): 32.4-72 Head (m): 6-58 Speed (r/min): 1200-3200 Max. Efficiency  N-n%: 45 NPSH (m): 3.5-8 Allowable Max. Power (Kw): 15   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high ...

http://http://www.sunbopump.com/Slurry-Pumps/1.51-Ash-Slurry-Pump-Small-Slurry-Pump-161.html

Capacity (m3/h): 39.6-86.4 Head (m): 12-64 Speed (r/min): 1300-2700 Max. Efficiency N-n %: 55 NPSH (m): 4-6 Allowable Max. Power (Kw): 30   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chrome alloy, SA05, 27 ...

http://http://www.sunbopump.com/Slurry-Pumps/32-Horizontal-Slurry-Pump-Heavy-Duty-Slurry-Pump-162.html

  Specification: Capacity (m3/h): 7-36 Head (m): 5-38 Speed (r/min): 1000-2600 Max. Efficiency  N-n%: 50 NPSH (m): 2-5 Allowable Max. Power (Kw):  15   Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the w ...

http://http://www.sunbopump.com/Slurry-Pumps/Rubber-Lined-Slurry-Pump-Corrosion-Resistance-Mining-Pump-from-China-163.html

  Specification: Capacity (m3/h): 36-75.5 Head (m): 19-39 Speed (r/min): 1300-2100 Max. Efficiency  N-n%: 55 NPSH (m): 2-4 Allowable Max. Power (Kw): 30   Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the wea ...

http://http://www.sunbopump.com/Slurry-Pumps/32-Horizontal-Rubber-Slurry-Pump-164.html

  Specification: Capacity (m3/h): 86.4-198 Head (m): 9-52 Speed (r/min): 1000-2200 Max. Efficiency  N-n%: 71 NPSH (m): 4-6 Allowable Max. Power (Kw):  30     Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continu ...

http://http://www.sunbopump.com/Slurry-Pumps/Pompa-per-liquami-Warman-Produttore-di-pompe-per-liquami-165.html

Specification Capacity (m3/h): 162-360 Head (m): 12-56 Speed (r/min): 800-1550 Max. Efficiency N-n%: 65 NPSH (m): 5-8 Allowable Max. Power (Kw): 60   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pumping of highly abrasive ...

http://http://www.sunbopump.com/Slurry-Pumps/Centrifugal-Slurry-Pump-Warman-AH-199;amur-Pompas305;-166.html

  Specification Capacity (m3/h): 70-324 Head (m): 10-40 Speed (r/min): 800-1350 Max. Efficiency  N-n%: 71.5 NPSH (m): 2-6 Allowable Max. Power (Kw):  60   Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is th ...

http://http://www.sunbopump.com/Slurry-Pumps/64-Centrifugal-Rubber-Slurry-Pump-Pompe-Warman-Pompe-à-boue-Chinoise-167.html

  Specification:  Capacity (m3/h): 360-828 Head (m): 10-61 Speed (r/min): 500-1140 Max. Efficiency  N-n%: 72 NPSH (m): 2-9 Allowable Max. Power (Kw): 120   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pump ...

http://http://www.sunbopump.com/Slurry-Pumps/China-Slurry-Pump-Manufacturer-Bomba-de-lodo-Warman-China-bomba-de-lodo-168.html

  Specification: Capacity (m3/h): 612-1368 Head (m): 11-61 Speed (r/min): 400-850 Max. Efficiency N-n%: 71 NPSH (m): 4-10 Allowable Max. Power (Kw): 260 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pumping of highly abras ...

http://http://www.sunbopump.com/Slurry-Pumps/200HS-F-Slurry-Pump-Horizontal-Slurry-Pump-Motor-System-169.html

  Specification: Capacity (m3/h): 540-1188 Head (m): 7-45 Speed (r/min): 300-600 Max. Efficiency N-n%: 80 NPSH (m): 2.5-7.5 Allowable Max. Power (Kw): 560   Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the wear p ...

http://http://www.sunbopump.com/Slurry-Pumps/1210-Rubber-Lined-Slurry-Pump-170.html

  Specification: Capacity (m3/h): 540-1440 Head (m): 14-60 Speed (r/min): 600-1000 Max. Efficiency  N-n%: 73 NPSH (m): 4-10 Allowable Max. Power (Kw): 120   Description: MS type pumps were designed specifically for successive use in slurry type applications where a large flow at a low to medium developed head is required. T ...

http://http://www.sunbopump.com/Slurry-Pumps/108-Middle-Duty-Slurry-Pump-Coal-Washery-Slurry-Pump-171.html

  Specification: Capacity (m3/h): 936-1980 Head (m): 7-68 Speed (r/min): 300-800 Max. Efficiency  N-n%: 82 NPSH (m): 6 Allowable Max. Power (Kw): 560   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chr ...

http://http://www.sunbopump.com/Slurry-Pumps/1210-Heavy-Duty-Slurry-Pump-Centrifugal-Horizontal-Slurry-172.html

  Specification: Capacity (m3/h): 1260-2772 Head (m): 13-63 Speed (r/min): 300-600 Max. Efficiency N-n%: 77 NPSH (m): 3-10 Allowable Max. Power (Kw): 560   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chro ...

http://http://www.sunbopump.com/Slurry-Pumps/1412-Mining-Slurry-Pump-Centrifugal-Horizontal-Slurry-Pump-173.html

  Specification: Capacity (m3/h):2520-5400 Head (m): 13-57 Speed (r/min): 200-400 Max. Efficiency N-n%: 85 NPSH (m): 5-10 Allowable Max. Power (Kw): 1200   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chro ...

http://http://www.sunbopump.com/Slurry-Pumps/2018-Heavy-Duty-Slurry-Pump-174.html

  Specification: Capacity (m3/h): 17-43.2 Head (m): 4-28.5 Speed (r/min): 1000-2200 Max. Efficiency N-n%: 40 Allowable Max. Power (Kw): 15 Standard Submerged Depth (mm): 900,1200   Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and p ...

http://http://www.sunbopump.com/Sump-Pump/40PV-SV-Model-Belt-Drive-Small-Sump-Pump-vertical-centrifugal-slurry-pumps-178.html

  Specification:  Capacity (m3/h): 18-114 Head (m): 5-31.5 Speed (r/min): 750-1500 Max. Efficiency N-n%: 60 Allowable Max. Power (Kw): 30 Standard Submerged Depth (mm): 900,1200,1500   Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty wa ...

http://http://www.sunbopump.com/Sump-Pump/65QV-SV-Model-Vertical-Slurry-Pump-Vertical-Submerged-Slurry-Pump-179.html

  Specification: Capacity (m3/h): 54-289 Head (m): 8.5-40 Speed (r/min): 500-1200 Max. Efficiency N-n%: 62 Allowable Max. Power (Kw): 75 Standard Submerged Depth (mm): 1200,1500,1800   Description: The vertical centrifugal slurry pumps are no submerged bearings or seals cantilevered pumps, which ideal for a variety of submerged ...

http://http://www.sunbopump.com/Sump-Pump/100RV-SVR-Rubber-Lined-Sump-Pump-Vertival-Slurry-Pump-Rubber-180.html

  Specification: Capacity (m3/h): 360-1152 Head (m): 7-33 Speed (r/min): 400-750 Max. Efficiency N-n%: 60 Allowable Max. Power (Kw): 200 Standard Submerged Depth (mm): 1800,2100,2400   Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water a ...

http://http://www.sunbopump.com/Sump-Pump/250TV-SV-Vertical-Spindle-Sump-Pump-Vertical-Slurry-Pump-181.html

  Specification: Capacity (m3/h): 540-1548 Head (m): 2.5-26 Speed (r/min): 350-700 Max. Efficiency N-n%: 60 Allowable Max. Power (Kw): 200 Standard Submerged Depth (mm): 1800,2100,2400   Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water ...

http://http://www.sunbopump.com/Sump-Pump/300TV-SV-Biggest-Vertical-Sump-Pump-China-Vertical-Spindle-Pumps-182.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/Laybrinth-for-Centrifugal-Slurry-Pumps-209.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/Rubber-End-Cover-Seal-for-Slurry-Pumps-211.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/Oil-Slinger-for-Centrifugal-Slurry-Pumps-215.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/SKF-Bearing-for-Slurry-Pumps-216.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/Timken-Bearing-for-Slurry-Pumps-217.html

DescriptionSunbo magnum centrifugal pumps are designed for the widest drilling rig processing oil and gas industry. Mission Magnum I Pump 3x2x13 centrifugal pumps with gland packing seal /mechanical seal and stainless steel/ceramic shaft sleeve used on offshore rigs and land-based rigs.Mission Magnum 1 Pumps& ...

http://http://www.sunbopump.com/Mud-Pump/Mission-Magnum-1-Pump-3x2x13-Mission-Magnum-Centrifugal-Pump-246.html

The ZJQ submersible slurry pump The operating of the unique sealing device greatly extends its service life. The pump is a hydraulic machine in which the motor and the water pump are coaxially submerged into the medium. The product has excellent material selection, excellent structure, wide flow passage and strong sewage discharge capacity. Su ...

http://http://www.sunbopump.com/Other-Pumps/150ZJQ-Submersible-Slurry-Pumps-251.html

Sunbo HS slurry pump is equivalent to warman AH Slurry Pump, It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corros ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/43-Horizontal-Slurry-Pump-Mining-Slurry-Pump-255.html

DescriptionSunbo magnum sandmaster centrifugal pumps are designed for the widest drilling rig processing oil and gas industry. Mission Magnum Sandmaster Pump 3x2x13 centrifugal pumps with gland packing seal /mechanical seal and stainless steel/ceramic shaft sleeve used on offshore rigs and land-based rigs.Mission ...

http://http://www.sunbopump.com/mud-pump/Mission-Magnum-Sandmaster-Pump-3x2x13-Misison-Centrifugal-Pump-258.html

Sunbo HS Series heavy duty horizontal slurry pumps specially designed for continuous pumping of highly abrasive, dense slurry from hydrocyclone feed to regrinding, flotation and tailings in mineral processing plants slurry. HS slurry pump is the perfect Warman AH slurry pumps replacement at low cost. These pumps are designed for a wide range of ero ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/64-Horizontal-Slurry-Pump-Mining-Slurry-Pump-266.html

Product introduction:    SG Series Gravel Pump: The impeller, guard plate, and wet flow parts are made of metal material.    SGH Series High Head Gravel Pump: The impeller, guard plate, and wet flow parts are made of metal material.    The pump shaft seal: Stuffing seal, auxiliary impeller&stuffing seal, ...

http://http://www.sunbopump.com/Gravel-Pump/16x14-Warman-Gravel-Pump-267.html

The slurry pump impeller play an extremely important role in the operation of centrifugal slurry pump. By rotating, it can help slurry pump meet the needs of the equipment. The slurry pump impeller is easy to be worn out, so we search for the special materials to prolong the lifespan of impeller, high chrome white iron is one of them, aims at ...

http://http://www.sunbopump.com/Metal-Parts/Metal-Impeller-Wear-Parts-268.html

The slurry pump parts consists wet parts, sealing parts, bearing assembly, pedestal and other parts. In slurry pump, Wet Parts means the lining parts which contact with fluid media, usually it includes impeller, volute, frame plate, throat bush. These parts will easily get corroded or abraded when working and should be replaced after a period ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Frame-Plate-Liner-Inser-269.html

Metal Expeller Ring - EAM029 is interchangeable with the original slurry pumps expeller rings. It works together with the expeller, providing the sealing of the pump. As the Expeller Ring is a fast wearing spare part, its design and material is essential for the service life of the pump. ▲ Expeller Seal is an impeller force of revers ...

http://http://www.sunbopump.com/Metal-Parts/Expeller-Ring-Metal-Wear-Parts-High-chrome-Expeller-Ring-Stuffing-Box-270.html

sunbo Slurry Pump Bearing assembly D005M also called rotor assembly, It is a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. It is most important part for drive power unit. The bearing assembly is to connect the ...

http://http://www.sunbopump.com/Bearing-Assembly/Bearing-assembly-D005M-warman-pump-parts-china-272.html

The Expeller EAM028 is a dynamic component in the slurry pumps with centrifugal seal, which has vanes to reduce the pressure on the shaft. The principle of the expeller seal is that the total pressure produced by the expeller vanes is greater than the pressure generated by the main impeller vanes plus the inlet pressure.       & ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Expeller-DAM028-EAM028-Expelelr-Ring-DAM029-EAM029-273.html

Casing for Vertical Slurry Pumps:Vertical slurry pumps are essential equipment in various industries, such as mining, construction, and wastewater treatment. These pumps are designed to handle abrasive and corrosive slurries efficiently. One way to enhance the performance and longevity of your vertical slurry pump is by investing in a high-quality ...

http://http://www.sunbopump.com/Metal-Parts/Casing-for-Vertical-Slurry-Pumps-SP10206A05-275.html

Spare Parts Horizontal Slurry PumpsRubber Impeller for horizontal slurry pumps size 6×4Part №: BMS – E4147Material: RubberThe impeller is moulded elastomer. It provides great wear and corrosion resistance. Deep side sealing vanes relieve seal pressure and minimize recirculation Rubber Impeller – BMS-E4147 for horizontal slurry pumps:  A r ...

http://http://www.sunbopump.com/Metal-Parts/Spare-Parts-Horizontal-Slurry-Pumps-size-6×4-277.html

Sunbo HS slurry pump is equivalent to warman AH Slurry Pump,It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosi ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/Warman-AH-slurry-pump-86-Replacement-pump-281.html

Slurry Pump Shaft is a large diameter with high strength shaft with short overhang minimizes deflection and contributes to long bearing life. It is most important part for bearing assembly. The shaft is to connect the slurry pump impeller and motor as a complete pump working system. Its stability will directly affect pump operation and work li ...

http://http://www.sunbopump.com/Metal-Parts/Weir-warman-pumps-australia-when-the-heat-pump-cant-warm-283.html

Polyurethane slurry pump impellers .We proudly manufacture quality Polyurethane slurry pump impellers and other replacement parts for some famous pump manufactures, which are 100% REVERSE INTERCHANGEABLE, no need to change your stock.Polyurethane slurry pump impeller (PUR and PU) is made by Polyurethane which is a polymer composed of a chain of org ...

http://http://www.sunbopump.com/Metal-Parts/Polyurethane-slurry-pump-impellers-285.html

E4110-A05 Slurry Pump Volute Liner is an important wear part of 6/4D-AH & 6/4E-AH slurry pumps. It forms a slurry pump chamber with throat bush and frame plate liner insert where the slurry would flow through them. Slurry volute Liner is a curved funnel increasing in area to the discharge port. It is often used with slurry pump impeller. As the ...

http://http://www.sunbopump.com/Metal-Parts/Gravel-Pump-Parts-Casing-286.html

Sunbo HS slurry pump is equivalent to warman AH Slurry Pump,It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosi ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/3x2-AH-slurry-pump-Centrifugal-slurry-pump-warman-287.html

Sunbo HS Series heavy duty horizontal slurry pump specially designed for continuous pumping of highly abrasive, dense slurry from hydrocyclone feed to regrinding, flotation and tailings in mineral processing plants slurry. HS slurry pump is the perfect Warman AH slurry pumps replacement at low cost. These pumps are designed for a wide range of eros ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/12X10-AH-Slurry-Pump-Mining-Centrifugal-Slurry-Pump-289.html

Sunbo HS slurry pump is equivalent to warman AH Slurry Pump,It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosi ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/350HS-heavy-duty-centrifugal-slurry-pump-Sunbo-16x14-AH-Pump-290.html