The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing ...

http://http://www.sunbopump.com/Slurry-Pumps/HS-HHS-SL-MS-Series-Slurry-Pumps-for-Mining-120.html

The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further ...

http://http://www.sunbopump.com/Gravel-Pump/SG-Horizontal-Centrifugal-Gravel-Pump-124.html

FGD pump is single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorption tower in FGD system in Power Plant. The wet parts are designed with the CFD Fluid Simulating Analysis Technology to ensure its high-efficiency operation. The position of impeller in the pump internal can be changed by adjus ...

http://http://www.sunbopump.com/FGD-Pump/FGD-Slurry-Pump-Gypsum-Discharge-Pump-126.html

The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...

http://http://www.sunbopump.com/Rubber-Parts/Slurry-Pump-Rubber-Impeller-132.html

The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...

http://http://www.sunbopump.com/Rubber-Parts/Rubber-Back-Liner-Wear-Parts-133.html

The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...

http://http://www.sunbopump.com/Rubber-Parts/Pump-Rubber-Front-Liner-Wear-Parts-134.html

Impeller is a rotor, rotating component of a centrifugal pump. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. It increa ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Metal-Impeller-Wear-Parts-135.html

Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in mineral processing and all other solid mixture applications.  All Sunbo Pump aftermarket slurry pump parts save you money and energy of your slurry pump parts ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Expeller-Ring-Metal-Wear-Parts-136.html

A volute Liner is a curved funnel increasing in area to the discharge port. It is often used with impeller pumps. As the area of the cross-section increases, the volute reduces the speed of the liquid and increases the pressure of the liquid. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the pump. Ma ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Volute-Liner-138.html

Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.   Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in miner ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Throatbush-139.html

  Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in mineral processing and all other solid mixture applications.  All Sunbo Pump aftermarket slurry pump parts save you money and energy of your slurry pu ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Frame-Plate-Liner-Insert-140.html

The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...

http://http://www.sunbopump.com/Rubber-Parts/Slurry-Pump-Rubber-Throat-Bush-142.html

The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing ...

http://http://www.sunbopump.com/Slurry-Pumps/Metal-Lined-Slurry-Pumps-148.html

Specification: Capacity (m3/h): 36-250 Head (m): 5-52 Speed (r/min): 600-1400 Max. Efficiency N-n%: 58 NPSH (m): 2.5-3.5 Allowable Max. Power (Kw): 60   Description: The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of ...

http://http://www.sunbopump.com/Gravel-Pump/100D-SG-model-Gravel-Pump-154.html

Specification: Capacity (m3/h): 126-576 Head (m): 6-45 Speed (r/min): 800-1400 Max. Efficiency N-n%: 60 NPSH (m): 3-4.5 Allowable Max. Power (Kw): 120   Description: The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of ...

http://http://www.sunbopump.com/Gravel-Pump/86-Gravel-Sand-Pump，Shield-Tunneling-Pump-155.html

Specification: Capacity (m3/h): 32.4-72 Head (m): 24-80 Speed (r/min): 500-950 Max. Efficiency N-n%:24-80 NPSH (m): 2.5-5 Allowable Max. Power (Kw): 560   Description: The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable o ...

http://http://www.sunbopump.com/Gravel-Pump/108-Gravel-Pump-Mining-Minerals-dredge-Pump-River-Dredge-Pump-Dredge-Pump-Factory-156.html

  Specification: Capacity (m3/h): 360-1440 Head (m): 10-60 Speed (r/min): 400-850 Max. Efficiency N-n%: 65 NPSH (m): 1.5-4.5 Allowable Max. Power (Kw): 600   Description: The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. ...

http://http://www.sunbopump.com/Gravel-Pump/1210-River-Sand-Dredging-Pump-Gravel-Pump-157.html

Specification: Capacity (m3/h): 720-3600 Head (m): 18-44 Speed (r/min): 300-500 Max. Efficiency N-n%: 70 NPSH (m): 3-9 Allowable Max. Power (Kw): 600   Description: The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of h ...

http://http://www.sunbopump.com/Gravel-Pump/1614-GH-High-Pressure-Gravel-Pump-Big-China-Dredge-Pump-for-Sale-158.html

Specification: Capacity (m3/h): 324-3600 Head (m): 26-70 Speed (r/min): 300-500 Max. Efficiency N-n%: 72 NPSH (m): 3-6 Allowable Max. Power (Kw): 1200   Description: The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of ...

http://http://www.sunbopump.com/Gravel-Pump/1412-Sand-Gravel-Pump-Dredging-Pump-159.html

  Specification: Capacity (m3/h): 86.4-198 Head (m): 9-52 Speed (r/min): 1000-2200 Max. Efficiency  N-n%: 71 NPSH (m): 4-6 Allowable Max. Power (Kw):  30     Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continu ...

http://http://www.sunbopump.com/Slurry-Pumps/Pompa-per-liquami-Warman-Produttore-di-pompe-per-liquami-165.html

Specification Capacity (m3/h): 162-360 Head (m): 12-56 Speed (r/min): 800-1550 Max. Efficiency N-n%: 65 NPSH (m): 5-8 Allowable Max. Power (Kw): 60   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pumping of highly abrasive ...

http://http://www.sunbopump.com/Slurry-Pumps/Centrifugal-Slurry-Pump-Warman-AH-199;amur-Pompas305;-166.html

  Specification:  Capacity (m3/h): 360-828 Head (m): 10-61 Speed (r/min): 500-1140 Max. Efficiency  N-n%: 72 NPSH (m): 2-9 Allowable Max. Power (Kw): 120   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pump ...

http://http://www.sunbopump.com/Slurry-Pumps/China-Slurry-Pump-Manufacturer-Bomba-de-lodo-Warman-China-bomba-de-lodo-168.html

  Specification: Capacity (m3/h): 612-1368 Head (m): 11-61 Speed (r/min): 400-850 Max. Efficiency N-n%: 71 NPSH (m): 4-10 Allowable Max. Power (Kw): 260 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pumping of highly abras ...

http://http://www.sunbopump.com/Slurry-Pumps/200HS-F-Slurry-Pump-Horizontal-Slurry-Pump-Motor-System-169.html

  Specification: Capacity (m3/h): 324-720Head (m): 30-118Speed (r/min): 600-1000Max. Efficiency N-n%: 64NPSH (m): 3-8Allowable Max. Power (Kw): 260  HHS series pump is designed for the continuous pumping of highly abrasive, high density slurries with high pressure. It is also called High Head Slurry Pump. The range is capable of handli ...

http://http://www.sunbopump.com/Slurry-Pumps/100HHS-F-High-Pressure-Slurry-Pump-High-Head-Slurry-Pump-184.html

MagnumSM series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently.Pump Size:3x2x13, 4x3x13,5x4x14,6x5x11,6x5x14,8x6x11,8x6x14,10x8x14 ...

http://http://www.sunbopump.com/Mud-Pump/Mission-Magnum-1-Pump-Mission-Magnum-I-Pump-Bomba-magnum-misión-Pompe-Mission-Magnum-185.html

MagnumSM series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently. Features:1. Open impeller design, ideally dealing high viscosity ...

http://http://www.sunbopump.com/Mud-Pump/Mission-Magnum-Pump-Mechanical-Seal-3x2x13-Drilling-Mud-Centrifugal-Pump-187.html

MagnumSM series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently. Features:1. Open impeller design, ideally dealing high viscosity ...

http://http://www.sunbopump.com/Mud-Pump/Mission-Magnum-Centrifugal-Pumps-6x5x11-Desilter-Pump-188.html

Sand Pump SSA series centrifugal sand pump is designed for continuous operation of heavy slurries that are abrasive, corrosive, or just plain tough to pump. SSA Series Pump are more compact in design, and it can be adaptted for hydraulic motor drive. It is mainly used for oilfield frac trucks as well as blending and pump dealing for water well dri ...

http://http://www.sunbopump.com/Mud-Pump/Nov-Mission-Magnum-Pumps-8x6x14-Mission-Magnum-Centrifugal-Pump-189.html

Sand SSA series centrifugal sand pump is designed for continuous operation of heavy slurries that are abrasive, corrosive, or just plain tough to pump. SSA Series Pump are more compact in design, and it can be adaptted for hydraulic motor drive. It is mainly used for oilfield frac trucks as well as blending and pump dealing for water well drilling ...

http://http://www.sunbopump.com/Mud-Pump/Mission-Magnum-Centrifugal-Pump-10x8x14-Oil-Drilling-Sand-Pumps-190.html

Mission Magnum ISM series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently.Size: 3x2x13, 4x3x13, 5x4x14, 6x5x11, 6x5x14, 8x6x14, 10x ...

http://http://www.sunbopump.com/Mud-Pump/Magnum-Centrifugal-Pump-4x3x13-Oil-Drilling-Sand-Pump-Solid-Control-Equipment-191.html

The SM series mud centrifugal pumps are similar with the SSA series pumps. All the spare parts are interchangeable, except the Frame Support and Shaft, 4 differences in length. The pump main spare parts are Pump Casing, Impeller, Bearing Block, Pump Axle, Bearing, Shaft Coupling, Wearing Plate, Seal Apparatus, OilS seal, Bolts , Nuts, Motor and Bas ...

http://http://www.sunbopump.com/OEM-Pump-Parts/Mission-Magnum-Centrifugal-Pump-Parts-list-mission-magnum-pump-parts-list-193.html

...

http://http://www.sunbopump.com/OEM-Pump-Parts/OEM-Centrifugal-Pump-Casing-198.html

...

http://http://www.sunbopump.com/OEM-Pump-Parts/OEM-Centrifugal-Pump-Impeller-199.html

...

http://http://www.sunbopump.com/OEM-Pump-Parts/OEM-Pump-parts-202.html

...

http://http://www.sunbopump.com/OEM-Pump-Parts/Mission-Magnum-2500-Supreme-Pump-Impeller-halco-2500-supreme-pump-parts-219.html

The Hydraulic Fracturing Pump SXP 14x12x22 is equivalent to Mission Magnum XP 14x12x22 . single  stage, single suction, horizontal centrifugal pump. The pump covers applications of big capacity of abrasive, corrosive and plain tough slurries with high sand concentration, especially oil and gas stimulation on frac trucks. . Full pipe diameter e ...

http://http://www.sunbopump.com/frac-pump/14x12x22-Mission-Magnum-XP-Pump-231.html

Durco Mark III pumpConforming to ASME (ANSI) B73.1, D Series Mark 3 pumps incorporate many proven reliability- and performance-enhancing features. They are available in a wide range of configurations, including mechanically sealed, dynamically sealed, sealless magnetically driven, low-flow, self-priming and recessed impeller. It provides flexibilit ...

http://http://www.sunbopump.com/ANSI-Pump/Durco-Mark-3-Pump-235.html

Durco Mark III pumpConforming to ASME (ANSI) B73.1, D Series Mark 3 pumps incorporate many proven reliability- and performance-enhancing features. They are available in a wide range of configurations, including mechanically sealed, dynamically sealed, sealless magnetically driven, low-flow, self-priming and recessed impeller. It provides flexibilit ...

http://http://www.sunbopump.com/ANSI-Pump/Durco-Mark-III-Pump-Mechanical-seal-Durco-Mark-3-Pump-238.html

Description:Sunbo SXP type 12x10x23 Slurry Pump, Sand Discharge Blender Pump size SXP 14x12x22, 12x10x23, for Shale Oil and Gas Fracturing. Shale and gas fracturing truck, 12x10x23 centrifugal blender pump,Mission Magnum XP Pump with mechanical seal which used for oil sand mixer truck and mixing grout, the open type impelle ...

http://http://www.sunbopump.com/frac-pump/12x10x23-Mission-Magnum-XP-Pump-241.html

We offers vertical mission pump which equivalent to  NOV Mission Magnum I type vertical centrifugal pumps, the vertical includes virtually all of the features of the Magnum I series. In a wet pit environment, the Vertical requires no bearings or sealing device below the waterline.SUNBO Pump® SBV series Mission Magnum I type ...

http://http://www.sunbopump.com/Mud-Pump/Mission-Vertical-Pump-242.html

Sunbo SGR 12x12 pump is equivalent to Standard Centrifugal Pump, Model 612L20B-B. Avaliable Pump size: Gorman rupp pump 12x12, 10x10.Gorman-Rupp 60 Series pumps are standard centrifugal, high pressure, high volume pumps with exceptional efficiencies (up to 85%), it is widely as completion and stimulation equipment in oil and gas field of slurr ...

http://http://www.sunbopump.com/Gorman-Pump/612L20B-B-Standard-Centrifugal-Pump-12x12-243.html

Sunbo Standard Centrifugal Pump SGR 10x10, 12x12, equivalent to 612L20B-B, Centrifugal suction pump replacement of Gorman rupp pump.Gorman-Rupp 60 Series pumps are standard centrifugal, high pressure, high volume pumps with exceptional efficiencies (up to 85%), it is widely as completion and stimulation equipment in oil and gas field of s ...

http://http://www.sunbopump.com/Gorman-Pump/Gorman-Rupp-60-Series-pumps-10x10-244.html

DescriptionSunbo magnum centrifugal pumps are designed for the widest drilling rig processing oil and gas industry. Mission Magnum I Pump 3x2x13 centrifugal pumps with gland packing seal /mechanical seal and stainless steel/ceramic shaft sleeve used on offshore rigs and land-based rigs.Mission Magnum 1 Pumps& ...

http://http://www.sunbopump.com/Mud-Pump/Mission-Magnum-1-Pump-3x2x13-Mission-Magnum-Centrifugal-Pump-246.html

Sunbo offers Centrifugal Sand Pump and spare parts, also pump complete packages, mobile pump packages. We also offer replacement Centrifugal Pumps and spare parts as well as refurbishment and repair of your existing pumps bought from NOV mission magnum, Halco, O'Drill MCM, Forum Energy, Double Life, Southwest, ABCO, Mesco, TSC, Midcontinents, D ...

http://http://www.sunbopump.com/mission-pump-parts/Forum-Baker-SPD-Mud-Hog-2.5-Pump-Replacement-Parts-247.html

Sunbo offers Centrifugal Sand Pump and spare parts, also pump complete packages, mobile pump packages. We also offer replacement Centrifugal Pumps and spare parts as well as refurbishment and repair of your existing pumps bought from NOV mission magnum, Halco, O'Drill MCM, Forum Energy, Double Life, Southwest, ABCO, Mesco, T ...

http://http://www.sunbopump.com/Mud-Pump/Halco-Supreme-2500-Centrifugal-Pump-Replacement-Parts-248.html

Sunbo NOT ONLY offer  bare pump, pump complete packages. We also offer replacement Centrifugal Pumps, as well as refurbishment and repair of your existing pumps bought from NOV mission magnum, Halco, O'Drill MCM, Forum Energy, Double Life, Southwest, ABCO, Mesco, TSC, Midcontinents, Dupagro or any China mission pump supplier.We&n ...

http://http://www.sunbopump.com/mission-pump-parts/Bomba-Magnum-Mission-Double-Life-250-Pump-Replacement-Parts-249.html

Sunbo offers Centrifugal Sand Pump and spare parts, also pump complete packages, mobile pump packages. We also offer replacement Centrifugal Pumps and spare parts as well as refurbishment and repair of your existing pumps bought from NOV mission magnum, Halco, O'Drill MCM, Forum Energy, Double Life, Southwest, ABCO, Mesco, TSC, Midcontinents, D ...

http://http://www.sunbopump.com/mission-pump-parts/Forum-Baker-SPD-Mud-Hog-2.5-Pump-Replacement-Parts-250.html

Sunbo offers Centrifugal Pumps and spare parts, also pump complete packages, mobile pump packages. We also offer replacement Centrifugal Pumps and spare parts as well as refurbishment and repair of your existing pumps bought from NOV mission magnum, Halco, O'Drill MCM, Forum Energy, Double Life, Southwest, ABCO, Mesco, TSC, Midcontine ...

http://http://www.sunbopump.com/mission-pump-parts/ODrill-MCM-250-Series-Pump-Replacement-Parts-253.html

Description:Sunbo made New Design of  high chrome alloy Sand Discharge Blender Pump,upper grade to replacement of  Mission Magnum XP centrifugal pump 14x12-22. Design for more heavy-duty and hydraulic fracturing applications. Now Sunbo team finished the new design of the SXP 14x12-150 pump, bigger Capacity and better hydraulic pump perfor ...

http://http://www.sunbopump.com/frac-pump/New-Design-Centrifugal-Sand-Blender-Pump-Mission-Magnum-XP-Pump-14X12-22-New-Design-254.html

Sunbo Pumps is a high-tech enterprise, integration of R&D, production, sales and service. With over ten years of worldwide pumps production experience, we can supply pumps and parts that is able to compete at a global scale. Sunbo’s ANSI chemical process pumps and parts can be interchangeable with world leading ITT­ Goulds® 3196 ...

http://http://www.sunbopump.com/ANSI-Pump/Chemical-Pump-ANSI-Pump-Centrfugal-Pump-Stainless-Steel-Pump-257.html

DescriptionSunbo magnum sandmaster centrifugal pumps are designed for the widest drilling rig processing oil and gas industry. Mission Magnum Sandmaster Pump 3x2x13 centrifugal pumps with gland packing seal /mechanical seal and stainless steel/ceramic shaft sleeve used on offshore rigs and land-based rigs.Mission ...

http://http://www.sunbopump.com/mud-pump/Mission-Magnum-Sandmaster-Pump-3x2x13-Misison-Centrifugal-Pump-258.html

Sunbo is a China centrifugal pump manufacturer from China, Magnum series centrifugal pumps are designed for the widest drilling fluid processing industry, including shale shaker, desanding, desilting, mud pump charging and mud system in oil exploration. Where Mission™ Magnum™ I / 2500 Supreme or MCM™ 250 series centrifugal pump ar ...

http://http://www.sunbopump.com/Mud-Pump/Mission-Magnum-I-Pump-10x8x14-Solid-Control-Equipment-Mission-Magnum-Pump-Packing-259.html

Sunbo SUPD series Centrifugal Pump is designed equivalent to BAKER SPD MUD HOG 2.5 Centrifugal Pumps. Typical Configuration: 2x3x13, 3x4x14, 4x5x14, 5x6x11, 6x8x11,  6x8x14, 8x10x14.Common applications,- Fresh water- Sea water-Drilling Mud- Ash Slurry Sunbo Centrifugal Pump Specifications:Model6x8x146x8x115x6x145x6x114x5x143x4x132x3x13Dis ...

http://http://www.sunbopump.com/Mud-Pump/SPD-MUD-HOG-2.5-Centrifugal-Pumps-260.html

General IntroductionSunbo SSA( Sunbo Sandmaster Pump) series Centrifugal Pump is equivalent to Mission Sandmaster Centrifugal Pumps. They have compact structure and can be adapted for hydraulic motor drive, which makes it ideal for limited space. They are popular mounted on frac truck and mixing unit as blending or pump charging service. They ...

http://http://www.sunbopump.com/Mud-Pump/China-Mission-Sandmaster-Pump-Centrifugal-Pump-Type-SSA-261.html

Sunbo SSA series Centrifugal Pumps can be sold as Bare Pumps or complete skid. Our Centrifugal pumps are available in a variety of engineered options:>  Horizontal Electric>  Vertical Electric>   Close Coupled Electric>   Horizontal Diesel>  Overhead Belt>   Side Bel ...

http://http://www.sunbopump.com/Mud-Pump/Centrifugal-Pump-Skid-Hydraulic-Motor-Driven-Bomba-Sandmaster-Mission-262.html

The compact and adaptable SANDMASTER centrifugal pump includes virtually all of the features of the MAGNUM I. In addition, the SANDMASTER is more compact in design and can be adapted for hydraulic motor drive. This added feature makes the SANDMASTER ideal for use in applications such as oilfield frac trucks as well as blending and pump charging ser ...

http://http://www.sunbopump.com/Mud-Pump/Mission-Magnum-Sandmaster-3-X-4-X-13-250-Series-Pump-with-a-Mechanical-Seal-263.html

The compact and adaptable Sandmaster Centrifugal pump includes all of the features of Mission Magnum Sandmaster Mud Pump. Sandmasters are more compact in design and can be adapted for hydraulic motor drive. These features make Sandmaster Pumps are ideal for use in applications such as oilfield frac trucks as well as blending and pump charging for w ...

http://http://www.sunbopump.com/Mud-Pump/Pump-Centrifugal-Mission-Sandmaster-Mission-Magnum-Sandmaster-Mud-Pump-264.html

Sunbo Pump is a China manufacture of top-quality industrial centrifugal pumps, including Nov Mission Sandmaster Pump and Nov Sandmaster Centrifugal Pump. Built to withstand harsh working conditions, the Nov Mission Sandmaster Pump is designed to handle abrasive and corrosive fluids in the oil and gas industry. This pump is known for its robust ...

http://http://www.sunbopump.com/Mud-Pump/China-Nov-Mission-Sandmaster-Pump-with-C-type-265.html

The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further i ...

http://http://www.sunbopump.com/Gravel-Pump/China-Dredging-Gravel-Pump-14x12-warman-gravel-Pump-271.html

WN dredge pump is a single-stage single suction cantilever horizontal centrifugal pump, with light weight, good-resistance, super dredging performance, perfectly suited for the dredge on the whole construction, high multiple economy benefits, etc. They can meet all the requirements from the dredges. Dredge pump are specially designed for mud, ...

http://http://www.sunbopump.com/Dredge-Pump/China-WN-dredge-pump-for-Dredging-industries-manufacturer-in-China-276.html

Sunbo Pumps is a high-tech enterprise, integration of R&D, production, sales and service. With over ten years of worldwide pumps production experience, we can supply pumps and parts that is able to compete at a global scale. Sunbo’s ANSI chemical process pumps and parts can be interchangeable with world leading ITT­ Goulds® 3196 ...

http://http://www.sunbopump.com/ANSI-Pump/ANSI-Standard-Single-Stage-Stainless-Steel-Centrifugal-Transfer-Chemical-Pump-278.html

Sunbo Pumps is a high-tech enterprise, integration of R&D, production, sales and service. With over ten years of worldwide pumps production experience, we can supply pumps and parts that is able to compete at a global scale. Sunbo’s ANSI chemical process pumps and parts can be interchangeable with world leading ITT­ Goulds® 3196 ...

http://http://www.sunbopump.com/ANSI-Pump/Replace-ANSI-Pump-Bare-Pump-of-Goulds-3196-in-Stainless-Steel-280.html

Polyurethane slurry pump impellers .We proudly manufacture quality Polyurethane slurry pump impellers and other replacement parts for some famous pump manufactures, which are 100% REVERSE INTERCHANGEABLE, no need to change your stock.Polyurethane slurry pump impeller (PUR and PU) is made by Polyurethane which is a polymer composed of a chain of org ...

http://http://www.sunbopump.com/Metal-Parts/Polyurethane-slurry-pump-impellers-285.html

E4110-A05 Slurry Pump Volute Liner is an important wear part of 6/4D-AH & 6/4E-AH slurry pumps. It forms a slurry pump chamber with throat bush and frame plate liner insert where the slurry would flow through them. Slurry volute Liner is a curved funnel increasing in area to the discharge port. It is often used with slurry pump impeller. As the ...

http://http://www.sunbopump.com/Metal-Parts/Gravel-Pump-Parts-Casing-286.html

Feed pumps are used to supply water to steam boilers. They are used at thermal power plants, steam generator plants of oil-bearing fields. Boilers working in tandem with this equipment can be of drum or direct-flow type. Feed pumps for steam boilers pump water with a temperature of 80 to 165 degrees. Depending on the design features, the units can ...

http://http://www.sunbopump.com/Other-Pumps/OEM-Feed-pumps-Centrifugal-pump-288.html

Sunbo Pumps is a high-tech enterprise, integration of R&D, production, sales and service. With over ten years of worldwide pumps production experience, we can supply pumps and parts that is able to compete at a global scale. Sunbo’s ANSI chemical process pumps and parts can be interchangeable with world leading ITT­ Goulds® 3196 ...

http://http://www.sunbopump.com/ANSI-Pump/ANSI-Process-3196-and-Mark-III-Rotech-Chemical-Centrifugal-Pump-in-Stainless-Steel-for-CNC-Machining-in-CD4M316SSTitanium-291.html

Sunbo Pumps is a high-tech enterprise, integration of R&D, production, sales and service. With over ten years of worldwide pumps production experience, we can supply pumps and parts that is able to compete at a global scale. Sunbo’s ANSI chemical process pumps and parts can be interchangeable with world leading ITT­ Goulds® 3196 ...

http://http://www.sunbopump.com/ANSI-Pump/D-sereis-Durco-mark-3-Rotech-ANSI-Standard-Single-Stage-Stainless-Steel-Centrifugal-Transfer-Chemical-Pump-293.html

Sunbo Pumps is a high-tech enterprise, integration of R&D, production, sales and service. With over ten years of worldwide pumps production experience, we can supply pumps and parts that is able to compete at a global scale. Sunbo’s ANSI chemical process pumps and parts can be interchangeable with world leading ITT­ Goulds® 3196 ...

http://http://www.sunbopump.com/ANSI-Pump/D-series-Flowserve-Durco-Mark-3-ANSI-petrochemical-process-pump-294.html

Sunbo Pumps is a high-tech enterprise, integration of R&D, production, sales and service. With over ten years of worldwide pumps production experience, we can supply pumps and parts that is able to compete at a global scale. Sunbo’s ANSI chemical process pumps and parts can be interchangeable with world leading ITT­ Goulds® 3196 ...

http://http://www.sunbopump.com/ANSI-Pump-Parts/Aftermarket-ANSI-Pump-Parts-Goulds-3196-Pumps-Adapter-for-Chemical-Industry-295.html

Sunbo Pumps is a high-tech enterprise, integration of R&D, production, sales and service. With over ten years of worldwide pumps production experience, we can supply pumps and parts that is able to compete at a global scale. Sunbo’s ANSI chemical process pumps and parts can be interchangeable with world leading ITT­ Goulds® 3196 ...

http://http://www.sunbopump.com/ANSI-Pump-Parts/Replacement-Pump-Part-of-ANSI-Standard-Centrifugal-Pump-Parts-Goulds-3196-Pump-Parts-Frames-296.html

Sunbo Pumps is a high-tech enterprise, integration of R&D, production, sales and service. With over ten years of worldwide pumps production experience, we can supply pumps and parts that is able to compete at a global scale. Sunbo’s ANSI chemical process pumps and parts can be interchangeable with world leading ITT­ Goulds® 3196 ...

http://http://www.sunbopump.com/ANSI-Pump-Parts/D-Series-Durco-Mark-3-ANSI-Process-Pump-Replacement-Part-100%-Interchangeable-with-Flowserve-Durco-Mark-3-Pump-Impeller-297.html

Sunbo Pumps is a high-tech enterprise, integration of R&D, production, sales and service. With over ten years of worldwide pumps production experience, we can supply pumps and parts that is able to compete at a global scale. Sunbo’s ANSI chemical process pumps and parts can be interchangeable with world leading ITT­ Goulds® 3196 ...

http://http://www.sunbopump.com/ANSI-Pump-Parts/Aftermarket-Replacement-Pump-Parts-for-ANSI-Process-Pumps-Flowserve-Durco-Mark-3-ANSI-Chemical-Pumps-298.html