The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing ...
http://http://www.sunbopump.com/Slurry-Pumps/HS-HHS-SL-MS-Series-Slurry-Pumps-for-Mining-120.html
The SF Froth Pump is of heavy duty construction, designed for continuous pumping of highly abrasive and corrosive frothy slurries. It has a vertical shaft configuration and comprise a hopper, with vertical Bearing Assembly, and Type 'HS' pump wet-end. It features a wide choice of replaceable abrasion resistant metal or moulded rubber casing liners ...
The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement w ...
http://http://www.sunbopump.com/Sump-Pump/Vertical-Submerged-Slurry-Pump-125.html
FGD pump is single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorption tower in FGD system in Power Plant. The wet parts are designed with the CFD Fluid Simulating Analysis Technology to ensure its high-efficiency operation. The position of impeller in the pump internal can be changed by adjus ...
http://http://www.sunbopump.com/FGD-Pump/FGD-Slurry-Pump-Gypsum-Discharge-Pump-126.html
Bearing assembly--Bearing assembly also called rotor assembly, pump parts assembly. It is a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. It is an important part of slurry pump and the most important part of d ...
http://http://www.sunbopump.com/Bearing-Assembly/Slurry-Pump-Bearing-Assembly-143.html
One-piece frame---A very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance. Slurry pump Base is the main part which handles the force from Pump casings, pump bearing assembly and the pulley of Motor. ...
http://http://www.sunbopump.com/Other-Pump-Parts/Pump-Base-146.html
The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing ...
http://http://www.sunbopump.com/Slurry-Pumps/Metal-Lined-Slurry-Pumps-148.html
Specification: Capacity (m3/h): 7-36 Head (m): 5-38 Speed (r/min): 1000-2600 Max. Efficiency N-n%: 50 NPSH (m): 2-5 Allowable Max. Power (Kw): 15 Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the w ...
Specification: Capacity (m3/h): 36-75.5 Head (m): 19-39 Speed (r/min): 1300-2100 Max. Efficiency N-n%: 55 NPSH (m): 2-4 Allowable Max. Power (Kw): 30 Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the wea ...
http://http://www.sunbopump.com/Slurry-Pumps/32-Horizontal-Rubber-Slurry-Pump-164.html
Specification: Capacity (m3/h): 86.4-198 Head (m): 9-52 Speed (r/min): 1000-2200 Max. Efficiency N-n%: 71 NPSH (m): 4-6 Allowable Max. Power (Kw): 30 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continu ...
Specification Capacity (m3/h): 162-360 Head (m): 12-56 Speed (r/min): 800-1550 Max. Efficiency N-n%: 65 NPSH (m): 5-8 Allowable Max. Power (Kw): 60 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pumping of highly abrasive ...
Specification Capacity (m3/h): 70-324 Head (m): 10-40 Speed (r/min): 800-1350 Max. Efficiency N-n%: 71.5 NPSH (m): 2-6 Allowable Max. Power (Kw): 60 Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is th ...
Specification: Capacity (m3/h): 360-828 Head (m): 10-61 Speed (r/min): 500-1140 Max. Efficiency N-n%: 72 NPSH (m): 2-9 Allowable Max. Power (Kw): 120 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pump ...
Specification: Capacity (m3/h): 612-1368 Head (m): 11-61 Speed (r/min): 400-850 Max. Efficiency N-n%: 71 NPSH (m): 4-10 Allowable Max. Power (Kw): 260 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pumping of highly abras ...
Specification: Capacity (m3/h): 540-1188 Head (m): 7-45 Speed (r/min): 300-600 Max. Efficiency N-n%: 80 NPSH (m): 2.5-7.5 Allowable Max. Power (Kw): 560 Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the wear p ...
http://http://www.sunbopump.com/Slurry-Pumps/1210-Rubber-Lined-Slurry-Pump-170.html
Specification: Capacity (m3/h): 540-1440 Head (m): 14-60 Speed (r/min): 600-1000 Max. Efficiency N-n%: 73 NPSH (m): 4-10 Allowable Max. Power (Kw): 120 Description: MS type pumps were designed specifically for successive use in slurry type applications where a large flow at a low to medium developed head is required. T ...
Specification: Capacity (m3/h): 21.6-136.8 Head (m): 7-46.4 Speed (r/min): 900-2400 Max. Efficiency N-n%: 57 NPSH (m): 2.5-6 Allowable Max. Power (Kw): 30 Description: SL type pumps were designed specifically for successive use in slurry type applications where a large flow at a low to medium developed head is r ...
Specification: Capacity (m3/h): 17-43.2 Head (m): 4-28.5 Speed (r/min): 1000-2200 Max. Efficiency N-n%: 40 Allowable Max. Power (Kw): 15 Standard Submerged Depth (mm): 900,1200 Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and p ...
Specification: Capacity (m3/h): 18-114 Head (m): 5-31.5 Speed (r/min): 750-1500 Max. Efficiency N-n%: 60 Allowable Max. Power (Kw): 30 Standard Submerged Depth (mm): 900,1200,1500 Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty wa ...
Specification: Capacity (m3/h): 54-289 Head (m): 8.5-40 Speed (r/min): 500-1200 Max. Efficiency N-n%: 62 Allowable Max. Power (Kw): 75 Standard Submerged Depth (mm): 1200,1500,1800 Description: The vertical centrifugal slurry pumps are no submerged bearings or seals cantilevered pumps, which ideal for a variety of submerged ...
Specification: Capacity (m3/h): 360-1152 Head (m): 7-33 Speed (r/min): 400-750 Max. Efficiency N-n%: 60 Allowable Max. Power (Kw): 200 Standard Submerged Depth (mm): 1800,2100,2400 Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water a ...
Specification: Capacity (m3/h): 540-1548 Head (m): 2.5-26 Speed (r/min): 350-700 Max. Efficiency N-n%: 60 Allowable Max. Power (Kw): 200 Standard Submerged Depth (mm): 1800,2100,2400 Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water ...
Description:Sunbo SXP type 12x10x23 Slurry Pump, Sand Discharge Blender Pump size SXP 14x12x22, 12x10x23, for Shale Oil and Gas Fracturing. Shale and gas fracturing truck, 12x10x23 centrifugal blender pump,Mission Magnum XP Pump with mechanical seal which used for oil sand mixer truck and mixing grout, the open type impelle ...
http://http://www.sunbopump.com/frac-pump/12x10x23-Mission-Magnum-XP-Pump-241.html
Sunbo offers Centrifugal Sand Pump and spare parts, also pump complete packages, mobile pump packages. We also offer replacement Centrifugal Pumps and spare parts as well as refurbishment and repair of your existing pumps bought from NOV mission magnum, Halco, O'Drill MCM, Forum Energy, Double Life, Southwest, ABCO, Mesco, TSC, Midcon ...
http://http://www.sunbopump.com/mission-pump-parts/DE-CP-PREMIUM-250-Pump-Replacement-Parts-252.html
The slurry pump parts consists wet parts, sealing parts, bearing assembly, pedestal and other parts. In slurry pump, Wet Parts means the lining parts which contact with fluid media, usually it includes impeller, volute, frame plate, throat bush. These parts will easily get corroded or abraded when working and should be replaced after a period ...
http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Frame-Plate-Liner-Inser-269.html
The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further i ...
sunbo Slurry Pump Bearing assembly D005M also called rotor assembly, It is a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. It is most important part for drive power unit. The bearing assembly is to connect the ...
S06210E62 Labyrinth is a component of drive end parts installed on SH005M slurry pump bearing assembly for 10/8ST-AH Slurry Pump.Slurry Pump Labyrinth is a kind of component of drive end parts, The purpose is to plug the hole in the bearing housing where the shaft passes through.sunbo can offer various materials regarding the clients requirements, ...
http://http://www.sunbopump.com/Metal-Parts/Warman-slurry-pump-china-E062-282.html
Slurry Pump Shaft is a large diameter with high strength shaft with short overhang minimizes deflection and contributes to long bearing life. It is most important part for bearing assembly. The shaft is to connect the slurry pump impeller and motor as a complete pump working system. Its stability will directly affect pump operation and work li ...
Sunbo HS slurry pump is equivalent to warman AH Slurry Pump,It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosi ...
Sunbo HS Series heavy duty horizontal slurry pump specially designed for continuous pumping of highly abrasive, dense slurry from hydrocyclone feed to regrinding, flotation and tailings in mineral processing plants slurry. HS slurry pump is the perfect Warman AH slurry pumps replacement at low cost. These pumps are designed for a wide range of eros ...
