The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing ...

http://http://www.sunbopump.com/Slurry-Pumps/HS-HHS-SL-MS-Series-Slurry-Pumps-120.html

ZJ series slurry pump is a type of single-stage, single-suction, horizontal, cantilevered, centrifugal slurry pump. The ZJ series pumps used international advanced solid-liquid two-phase flow theory and designed using the Minimum-Wear principle. ZJ series slurry pumps are widely used in mining ,metallurgy, power ,coalpetroleum, chemical and buildin ...

http://http://www.sunbopump.com/Slurry-Pumps/ZJ-Trash-Slurry-Pumps-121.html

ZGB(P) slurry pumps is horizontal cantilever single-stage, single-suction, double-case and high head of delivery centrifugal slurry pump. Series ZGB(P) UP-to-date generation Slurry Pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture. The series of pump has the advantages of r ...

http://http://www.sunbopump.com/Slurry-Pumps/ZGB-High-performance-Slurry-Pumps-122.html

The SF Froth Pump is of heavy duty construction, designed for continuous pumping of highly abrasive and corrosive frothy slurries. It has a vertical shaft configuration and comprise a hopper, with vertical Bearing Assembly, and Type 'HS' pump wet-end. It features a wide choice of replaceable abrasion resistant metal or moulded rubber casing liners ...

http://http://www.sunbopump.com/Froth-Pump/SF-Series-Froth-Pump-123.html

The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further ...

http://http://www.sunbopump.com/Gravel-Pump/SG-Horizontal-Centrifugal-Gravel-Pump-124.html

The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement w ...

http://http://www.sunbopump.com/Sump-Pump/SV-Series-Sump-Pump-125.html

FGD pump is single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorption tower in FGD system in Power Plant. The wet parts are designed with the CFD Fluid Simulating Analysis Technology to ensure its high-efficiency operation. The position of impeller in the pump internal can be changed by adjus ...

http://http://www.sunbopump.com/FGD-Pump/FGD-Slurry-Pump-126.html

Main metal wetted parts are Impeller, Volute, Throat Bush, Frame Plate Liner Insert , Expeller, Expeller Ring... and they are made of high chrome alloy, 27%, SA05,anti-wear, anti-abrasive , ASTM 532,Class III, Type A and long service-life, allowable PH 5-12. According to the different requirement from clients, there are optional materials: SA033, ...

http://http://www.sunbopump.com/Metal-Parts/Metal-Slurry-pump-Parts-127.html

Main rubber wetted parts are made of SR33, SR26, SR55,wear-resistant,anti-corrosive, and long service life. Widely used for delivering small particles and no edges. ( Applications: Impeller, Volute, Throat Bushing, Frame plate liner, Expeller Ring)  Material Specification: ...

http://http://www.sunbopump.com/Rubber-Parts/Slurry-Pump-Rubber-Parts-128.html

OEM business is an important part of our business. Sunbo accept OEM business as samples or drawings of all kinds of pumps and casting spare parts. And more we offer ODM service too.   We are experienced in anti-abrasion and anti-corrosion material spare parts business. The main material specifications as below:       &nb ...

http://http://www.sunbopump.com/Other-Pumps/OEM-Pumps-129.html

OEM business is a big part of our business. Sunbo accept OEM ODM business as samples or drawings of all kinds of pumps. For special awful working condition, with pointed special material components. Good Quality, Fast Delivery, Strength your competition advantages at local market. We are experienced in anti-abrasion and anti-corrosion material s ...

http://http://www.sunbopump.com/Other-Pump-Parts/OEM-Pump-Parts-130.html

The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...

http://http://www.sunbopump.com/Rubber-Parts/Slurry-Pump-Rubber-Impeller-132.html

The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...

http://http://www.sunbopump.com/Rubber-Parts/Rubber-Back-Liner-Wear-Parts-133.html

The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...

http://http://www.sunbopump.com/Rubber-Parts/Pump-Rubber-Front-Liner-Wear-Parts-134.html

Impeller is a rotor, rotating component of a centrifugal pump. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. It increa ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Metal-Impeller-Wear-Parts-135.html

Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in mineral processing and all other solid mixture applications.  All Sunbo Pump aftermarket slurry pump parts save you money and energy of your slurry pump parts ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Expeller-Ring-Metal-Wear-Parts-136.html

Polyurethane (commonly abbreviated PU) is a unique material that offers the elasticity of rubber combined with the toughness and durability of metal. It allows the engineer to replace rubber, plastic and metal with the ultimate in abrasion resistance and physical properties. Polyurethane can reduce plant maintenance. Urethanes abrasion and tear re ...

http://http://www.sunbopump.com/Polyurethane-Parts/Polyurethane-pump-wear-parts-137.html

A volute Liner is a curved funnel increasing in area to the discharge port. It is often used with impeller pumps. As the area of the cross-section increases, the volute reduces the speed of the liquid and increases the pressure of the liquid. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the pump. Ma ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Volute-Liner-138.html

Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.   Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in miner ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Throatbush-139.html

  Sunbo Pump stocks a range of slurry pump parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc, and are used widely across the globe in mineral processing and all other solid mixture applications.  All Sunbo Pump aftermarket slurry pump parts save you money and energy of your slurry pu ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Frame-Plate-Liner-Insert-140.html

...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Metal-Expeller-141.html

The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...

http://http://www.sunbopump.com/Rubber-Parts/Slurry-Pump-Rubber-Throat-Bush-142.html

Bearing assembly--Bearing assembly also called rotor assembly, pump parts assembly. It is a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. It is an important part of slurry pump and the most important part of d ...

http://http://www.sunbopump.com/Bearing-Assembly/Slurry-Pump-Bearing-Assembly-143.html

Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Cover Plate is the suction end of slurry pump head part. It's the outer shell of the radial subdivision, and combined with Frame plate together make up to the whole pump body.Pump cover is under pressure ...

http://http://www.sunbopump.com/Other-Pump-Parts/Pump-Body-Cover-Plate-Frame-Plate-145.html

One-piece frame---A very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance. Slurry pump Base is the main part which handles the force from Pump casings, pump bearing assembly and the pulley of Motor. ...

http://http://www.sunbopump.com/Other-Pump-Parts/Pump-Base-146.html

The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing ...

http://http://www.sunbopump.com/Slurry-Pumps/Metal-Lined-Slurry-Pumps-148.html

HHS series pump is designed for the continuous pumping of highly abrasive, high density slurries with high pressure. It is also called High Head Slurry Pump. The range is capable of handling heavy duty, medium size particles and pumping at heads in excess of 90 meters per stage. The small eye to impeller diameter ratio provides a combination that ...

http://http://www.sunbopump.com/Slurry-Pumps/High-Pressure-Centrifugal-Slurry-Pump-149.html

Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the wear parts material. The wear parts are made of material natural Rubber SR26, SR55, SR33. And more, OEM material is available, eg. SR08, SS42, SS10, SS12, SS01, SS02, SS21,S S31, SU01...etc, to so ...

http://http://www.sunbopump.com/Slurry-Pumps/Rubber-Lined-Slurry-Pump-150.html

Welcome OEM pumps from us. Pumps will be totally customer-made against clients' samples or drawings. To save clients's cost with super quality.                                     ...

http://http://www.sunbopump.com/Other-Pumps/Submersible-Slurry-Pump-151.html

Specification: Capacity (m3/h): 126-576 Head (m): 6-45 Speed (r/min): 800-1400 Max. Efficiency N-n%: 60 NPSH (m): 3-4.5 Allowable Max. Power (Kw): 120   Description: The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of ...

http://http://www.sunbopump.com/Gravel-Pump/150E-SG-Model-Gravel-Sand-Pump-155.html

Specification:   Capacity (m3/h): 12.6-28.8 Head (m): 6-68 Speed (r/min): 1200-3800 Max. Efficiency  N-n%: 40 NPSH (m): 2-4 Allowable Max. Power (Kw): 15   Description:   The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted ...

http://http://www.sunbopump.com/Slurry-Pumps/25HS-B-model-Small-Slurry-Pump-160.html

Specification:   Capacity (m3/h): 32.4-72 Head (m): 6-58 Speed (r/min): 1200-3200 Max. Efficiency  N-n%: 45 NPSH (m): 3.5-8 Allowable Max. Power (Kw): 15   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high ...

http://http://www.sunbopump.com/Slurry-Pumps/40HS-B-model-Ash-Slurry-Pump-161.html

Capacity (m3/h): 39.6-86.4 Head (m): 12-64 Speed (r/min): 1300-2700 Max. Efficiency N-n %: 55 NPSH (m): 4-6 Allowable Max. Power (Kw): 30   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chrome alloy, SA05, 27 ...

http://http://www.sunbopump.com/Slurry-Pumps/50HS-C-Model-Horizontal-Slurry-Pump-162.html

  Specification: Capacity (m3/h): 7-36 Head (m): 5-38 Speed (r/min): 1000-2600 Max. Efficiency  N-n%: 50 NPSH (m): 2-5 Allowable Max. Power (Kw):  15   Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the w ...

http://http://www.sunbopump.com/Slurry-Pumps/40HSR-B-model-ASH-Rubber-Slurry-Pump-163.html

  Specification: Capacity (m3/h): 36-75.5 Head (m): 19-39 Speed (r/min): 1300-2100 Max. Efficiency  N-n%: 55 NPSH (m): 2-4 Allowable Max. Power (Kw): 30   Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the wea ...

http://http://www.sunbopump.com/Slurry-Pumps/50HSR-C-Model-Horizontal-Rubber-Slurry-Pump-164.html

  Specification: Capacity (m3/h): 86.4-198 Head (m): 9-52 Speed (r/min): 1000-2200 Max. Efficiency  N-n%: 71 NPSH (m): 4-6 Allowable Max. Power (Kw):  30     Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continu ...

http://http://www.sunbopump.com/Slurry-Pumps/75HS-C-model-high-quality-Slurry-Pump-165.html

Specification Capacity (m3/h): 162-360 Head (m): 12-56 Speed (r/min): 800-1550 Max. Efficiency N-n%: 65 NPSH (m): 5-8 Allowable Max. Power (Kw): 60   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pumping of highly abrasive ...

http://http://www.sunbopump.com/Slurry-Pumps/100HS-D-Model-Centrifugal-Slurry-Pump-166.html

  Specification Capacity (m3/h): 70-324 Head (m): 10-40 Speed (r/min): 800-1350 Max. Efficiency  N-n%: 71.5 NPSH (m): 2-6 Allowable Max. Power (Kw):  60   Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is th ...

http://http://www.sunbopump.com/Slurry-Pumps/100HSR-D-Model-Rubber-Slurry-Pump-167.html

  Specification:  Capacity (m3/h): 360-828 Head (m): 10-61 Speed (r/min): 500-1140 Max. Efficiency  N-n%: 72 NPSH (m): 2-9 Allowable Max. Power (Kw): 120   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pump ...

http://http://www.sunbopump.com/Slurry-Pumps/150HS-E-Sunbo-Slurry-Pump-168.html

  Specification: Capacity (m3/h): 612-1368 Head (m): 11-61 Speed (r/min): 400-850 Max. Efficiency N-n%: 71 NPSH (m): 4-10 Allowable Max. Power (Kw): 260 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pumping of highly abras ...

http://http://www.sunbopump.com/Slurry-Pumps/200HS-F-Slurry-Pump-169.html

  Specification: Capacity (m3/h): 540-1188 Head (m): 7-45 Speed (r/min): 300-600 Max. Efficiency N-n%: 80 NPSH (m): 2.5-7.5 Allowable Max. Power (Kw): 560   Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the wear p ...

http://http://www.sunbopump.com/Slurry-Pumps/200HSR-Horizontal-Rubber-Slurry-Pump-170.html

  Specification: Capacity (m3/h): 540-1440 Head (m): 14-60 Speed (r/min): 600-1000 Max. Efficiency  N-n%: 73 NPSH (m): 4-10 Allowable Max. Power (Kw): 120   Description: MS type pumps were designed specifically for successive use in slurry type applications where a large flow at a low to medium developed head is required. T ...

http://http://www.sunbopump.com/Slurry-Pumps/200MS-E-Slurry-Pump-171.html

  Specification: Capacity (m3/h): 936-1980 Head (m): 7-68 Speed (r/min): 300-800 Max. Efficiency  N-n%: 82 NPSH (m): 6 Allowable Max. Power (Kw): 560   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chr ...

http://http://www.sunbopump.com/Slurry-Pumps/250HS-ST-Slurry-Pump-172.html

  Specification: Capacity (m3/h): 1260-2772 Head (m): 13-63 Speed (r/min): 300-600 Max. Efficiency N-n%: 77 NPSH (m): 3-10 Allowable Max. Power (Kw): 560   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chro ...

http://http://www.sunbopump.com/Slurry-Pumps/300HS-ST-Slurry-Pump-173.html

  Specification: Capacity (m3/h):2520-5400 Head (m): 13-57 Speed (r/min): 200-400 Max. Efficiency N-n%: 85 NPSH (m): 5-10 Allowable Max. Power (Kw): 1200   Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chro ...

http://http://www.sunbopump.com/Slurry-Pumps/450HS-TU-Heavy-Duty-Slurry-Pump-174.html

  Specification:  Capacity (m3/h): 21.6-136.8 Head (m): 7-46.4 Speed (r/min): 900-2400 Max. Efficiency  N-n%: 57 NPSH (m): 2.5-6 Allowable Max. Power (Kw): 30   Description: SL type pumps were designed specifically for successive use in slurry type applications where a large flow at a low to medium developed head is r ...

http://http://www.sunbopump.com/Slurry-Pumps/75C-SL-model-Light-Duty-Slurry-Pump-175.html

  Specification: Capacity (m3/h): 17-43.2 Head (m): 4-28.5 Speed (r/min): 1000-2200 Max. Efficiency N-n%: 40 Allowable Max. Power (Kw): 15 Standard Submerged Depth (mm): 900,1200   Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and p ...

http://http://www.sunbopump.com/Sump-Pump/40PV-SV-Model-Belt-Drive-Small-Sump-Pump-178.html

  Specification:  Capacity (m3/h): 18-114 Head (m): 5-31.5 Speed (r/min): 750-1500 Max. Efficiency N-n%: 60 Allowable Max. Power (Kw): 30 Standard Submerged Depth (mm): 900,1200,1500   Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty wa ...

http://http://www.sunbopump.com/Sump-Pump/65QV-SV-Model-Vertical-Slurry-Pump-179.html

  Specification: Capacity (m3/h): 54-289 Head (m): 8.5-40 Speed (r/min): 500-1200 Max. Efficiency N-n%: 62 Allowable Max. Power (Kw): 75 Standard Submerged Depth (mm): 1200,1500,1800   Description: The vertical centrifugal slurry pumps are no submerged bearings or seals cantilevered pumps, which ideal for a variety of submerged ...

http://http://www.sunbopump.com/Sump-Pump/100RV-SVR-Model-Rubber-Lined-Sump-Pump-180.html

  Specification: Capacity (m3/h): 360-1152 Head (m): 7-33 Speed (r/min): 400-750 Max. Efficiency N-n%: 60 Allowable Max. Power (Kw): 200 Standard Submerged Depth (mm): 1800,2100,2400   Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water a ...

http://http://www.sunbopump.com/Sump-Pump/250TV-SV-Model-Vertical-Spindle-Sump-Pump-181.html

  Specification: Capacity (m3/h): 540-1548 Head (m): 2.5-26 Speed (r/min): 350-700 Max. Efficiency N-n%: 60 Allowable Max. Power (Kw): 200 Standard Submerged Depth (mm): 1800,2100,2400   Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water ...

http://http://www.sunbopump.com/Sump-Pump/300TV-SV-Model-Biggest-Sump-Pump-182.html

  Specification: Capacity (m3/h): 68.4-136.8Head (m): 25-87Speed (r/min): 850-1400Max. Efficiency N-n%: 47NPSH (m): 3-7.5Allowable Max. Power (Kw): 60   HHS series pump is designed for the continuous pumping of highly abrasive, high density slurries with high pressure. It is also called High Head Slurry Pump. The range is capable of h ...

http://http://www.sunbopump.com/Slurry-Pumps/50HHS-C-High-Head-Slurry-Pump-32-HH-High-Pressure-Slurry-Pump-183.html

  Specification: Capacity (m3/h): 324-720Head (m): 30-118Speed (r/min): 600-1000Max. Efficiency N-n%: 64NPSH (m): 3-8Allowable Max. Power (Kw): 260  HHS series pump is designed for the continuous pumping of highly abrasive, high density slurries with high pressure. It is also called High Head Slurry Pump. The range is capable of handli ...

http://http://www.sunbopump.com/Slurry-Pumps/100HHS-F-High-Pressure-Slurry-Pump-184.html

Sand Pump SSA series centrifugal sand pump is designed for continuous operation of heavy slurries that are abrasive, corrosive, or just plain tough to pump. SSA Series Pump are more compact in design, and it can be adaptted for hydraulic motor drive. It is mainly used for oilfield frac trucks as well as blending and pump dealing for water well dri ...

http://http://www.sunbopump.com/Mud-Pump/6x5x14-Drilling-Slurry-Pump-192.html

The Shaft Sleeve spare part code is 075 and 076. We have slurry pump shaft sleeve in material 4Cr13, Ceramic coated, tungsten carbide coated and stainless steel, to meet different applications. The slurry pump shaft sleeve protects the pump shaft from slurry abrasion and corrosion, enhance the pump life time. And more, we offer OEM service of shaft ...

http://http://www.sunbopump.com/Other-Pump-Parts/Pump-Ceramic-shaft-sleeve-194.html

The Shaft Sleeve spare part code is 075 and 076. We have slurry pump shaft sleeve in material 4Cr13, Ceramic coated, tungsten carbide coated and stainless steel, to meet different applications. The slurry pump shaft sleeve protects the pump shaft from slurry abrasion and corrosion, enhance the pump life time. And more, we offer OEM service of shaf ...

http://http://www.sunbopump.com/Other-Pump-Parts/3Cr13-Pump-Shaft-Sleeve-195.html

...

http://http://www.sunbopump.com/OEM-Pump-Parts/OEM-Pump-Body-201.html

...

http://http://www.sunbopump.com/OEM-Pump-Parts/OEM-Pump-parts-202.html

...

http://http://www.sunbopump.com/OEM-Pump-Parts/Pump-Parts-Casting-204.html

...

http://http://www.sunbopump.com/OEM-Pump-Parts/Slurry-Pump-Throatbush-205.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/End-Cover-207.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/Laybrinth-209.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/Discharge-Joint-Ring-210.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/Rubber-End-Cover-Seal-211.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/Rubber-Intake-Joint-Ring-212.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/Leap-Seal-213.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/Oil-Seal-Retainer-214.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/Oil-Slinger-215.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/SKF-Bearing-216.html

...

http://http://www.sunbopump.com/Other-Pump-Parts/Timken-Bearing-217.html

...

http://http://www.sunbopump.com/Rubber-Parts/OEM-High-Seal-Thick-Liner-Rubber-Slurry-Pump-Parts-221.html

Description:Sunbo SXP type 12x10x23 Slurry Pump, Sand Discharge Blender Pump size SXP 14x12x22, 12x10x23, for Shale Oil and Gas Fracturing. Shale and gas fracturing truck, 12x10x23 centrifugal blender pump,Mission Magnum XP Pump with mechanical seal which used for oil sand mixer truck and mixing grout, the open type impelle ...

http://http://www.sunbopump.com/frac-pump/12x10x23-Mission-Magnum-XP-Pump-241.html

DescriptionSunbo magnum centrifugal pumps are designed for the widest drilling rig processing oil and gas industry. Mission Magnum I Pump 3x2x13 centrifugal pumps with gland packing seal /mechanical seal and stainless steel/ceramic shaft sleeve used on offshore rigs and land-based rigs.Mission Magnum 1 Pumps& ...

http://http://www.sunbopump.com/Mud-Pump/Mission-Magnum-1-Pump-3x2x13-Misison-Magnum-Centrifugal-Pump-246.html

The ZJQ submersible slurry pump The operating of the unique sealing device greatly extends its service life. The pump is a hydraulic machine in which the motor and the water pump are coaxially submerged into the medium. The product has excellent material selection, excellent structure, wide flow passage and strong sewage discharge capacity. Su ...

http://http://www.sunbopump.com/Other-Pumps/150ZJQ-Submersible-Slurry-Pumps-251.html

Sunbo HS slurry pump is equivalent to warman AH Slurry Pump, It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corros ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/43-Horizontal-Slurry-Pump-Mining-Slurry-Pump-255.html

DescriptionSunbo magnum sandmaster centrifugal pumps are designed for the widest drilling rig processing oil and gas industry. Mission Magnum Sandmaster Pump 3x2x13 centrifugal pumps with gland packing seal /mechanical seal and stainless steel/ceramic shaft sleeve used on offshore rigs and land-based rigs.Mission ...

http://http://www.sunbopump.com/mud-pump/Mission-Magnum-Sandmaster-Pump-3x2x13-Misison-Centrifugal-Pump-258.html

General IntroductionSunbo SSA( Sunbo Sandmaster Pump) series Centrifugal Pump is equivalent to Mission Sandmaster Centrifugal Pumps. They have compact structure and can be adapted for hydraulic motor drive, which makes it ideal for limited space. They are popular mounted on frac truck and mixing unit as blending or pump charging service. They ...

http://http://www.sunbopump.com/Mud-Pump/China-Mission-Sandmaster-Pump-Centrifugal-Pump-Type-SSA-261.html

Sunbo HS Series heavy duty horizontal slurry pumps specially designed for continuous pumping of highly abrasive, dense slurry from hydrocyclone feed to regrinding, flotation and tailings in mineral processing plants slurry. HS slurry pump is the perfect Warman AH slurry pumps replacement at low cost. These pumps are designed for a wide range of ero ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/64-Horizontal-Slurry-Pump-Mining-Slurry-Pump-266.html

Product introduction:    SG Series Gravel Pump: The impeller, guard plate, and wet flow parts are made of metal material.    SGH Series High Head Gravel Pump: The impeller, guard plate, and wet flow parts are made of metal material.    The pump shaft seal: Stuffing seal, auxiliary impeller&stuffing seal, ...

http://http://www.sunbopump.com/Gravel-Pump/16x14-Warman-Gravel-Pump-267.html

The slurry pump impeller play an extremely important role in the operation of centrifugal slurry pump. By rotating, it can help slurry pump meet the needs of the equipment. The slurry pump impeller is easy to be worn out, so we search for the special materials to prolong the lifespan of impeller, high chrome white iron is one of them, aims at ...

http://http://www.sunbopump.com/Metal-Parts/Metal-Impeller-Wear-Parts-268.html

The slurry pump parts consists wet parts, sealing parts, bearing assembly, pedestal and other parts. In slurry pump, Wet Parts means the lining parts which contact with fluid media, usually it includes impeller, volute, frame plate, throat bush. These parts will easily get corroded or abraded when working and should be replaced after a period ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Frame-Plate-Liner-Inser-269.html

Metal Expeller Ring - EAM029 is interchangeable with the original slurry pumps expeller rings. It works together with the expeller, providing the sealing of the pump. As the Expeller Ring is a fast wearing spare part, its design and material is essential for the service life of the pump. ¡ø Expeller Seal is an impeller force of revers ...

http://http://www.sunbopump.com/Metal-Parts/Expeller-Ring-Metal-Wear-Parts-High-chrome-Expeller-Ring-Stuffing-Box-270.html

The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further i ...

http://http://www.sunbopump.com/Gravel-Pump/China-Dredging-Gravel-Pump-14x12-warman-gravel-Pump-271.html

sunbo Slurry Pump Bearing assembly D005M also called rotor assembly, It is a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. It is most important part for drive power unit. The bearing assembly is to connect the ...

http://http://www.sunbopump.com/Bearing-Assembly/Bearing-assembly-D005M-warman-pump-parts-china-272.html

The Expeller EAM028 is a dynamic component in the slurry pumps with centrifugal seal, which has vanes to reduce the pressure on the shaft. The principle of the expeller seal is that the total pressure produced by the expeller vanes is greater than the pressure generated by the main impeller vanes plus the inlet pressure.       & ...

http://http://www.sunbopump.com/Metal-Parts/Slurry-Pump-Expeller-DAM028-EAM028-Expelelr-Ring-DAM029-EAM029-273.html

A Lantern Ring distributes the liquid uniformly around the shaft, providing lubrication to the packing. The lubrication from the fluid cools and seals the shaft and packing. The function of the water seal ring is to form a closed space on the rotor shaft of the pump to prevent the working medium of the pump from leaking. During the normal oper ...

http://http://www.sunbopump.com/Metal-Parts/Water-seal-ring-warman-ahf-pump-curves-sump-pump-warman-274.html

Casing for Vertical Slurry Pumps:Vertical slurry pumps are essential equipment in various industries, such as mining, construction, and wastewater treatment. These pumps are designed to handle abrasive and corrosive slurries efficiently. One way to enhance the performance and longevity of your vertical slurry pump is by investing in a high-quality ...

http://http://www.sunbopump.com/Metal-Parts/Casing-for-Vertical-Slurry-Pumps-SP10206A05-275.html

Spare Parts Horizontal Slurry PumpsRubber Impeller for horizontal slurry pumps size 6¡Á4Part ¡í: BMS ¨C E4147Material: RubberThe impeller is moulded elastomer. It provides great wear and corrosion resistance. Deep side sealing vanes relieve seal pressure and minimize recirculation Rubber Impeller ¨C BMS-E4147 for horizontal slurry pumps:  A r ...

http://http://www.sunbopump.com/Metal-Parts/Spare-Parts-Horizontal-Slurry-Pumps-size-6¡Á4-277.html

Wear Resistant R55 Slurry Pump Parts Features & advantages:Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.Impeller - front and rear shrouds have pu ...

http://http://www.sunbopump.com/Metal-Parts/Wear-Resistant-R55-Slurry-Pump-Parts-warman-slurry-pump-spares-279.html

Sunbo HS slurry pump is equivalent to warman AH Slurry Pump,It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosi ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/Warman-AH-slurry-pump-86-Replacement-pump-281.html

S06210E62 Labyrinth is a component of drive end parts installed on SH005M slurry pump bearing assembly for 10/8ST-AH Slurry Pump.Slurry Pump Labyrinth is a kind of component of drive end parts, The purpose is to plug the hole in the bearing housing where the shaft passes through.sunbo can offer various materials regarding the clients requirements, ...

http://http://www.sunbopump.com/Metal-Parts/Warman-slurry-pump-china-E062-282.html

Slurry Pump Shaft is a large diameter with high strength shaft with short overhang minimizes deflection and contributes to long bearing life. It is most important part for bearing assembly. The shaft is to connect the slurry pump impeller and motor as a complete pump working system. Its stability will directly affect pump operation and work li ...

http://http://www.sunbopump.com/Metal-Parts/Weir-warman-pumps-australia-when-the-heat-pump-cant-warm-283.html

Gland packingThe gland packing's application limit is primarily determined by the extent to which heat developing due to friction can be dissipated. For heavy-duty gland packings, leakage water is actually pre-cooled by means of an internally cooled shaft protecting sleeve and a cooling jacket.The packing materials generally employed are braide ...

http://http://www.sunbopump.com/Metal-Parts/Metal-Gland-ring-C044-slurry-pumps-metall-284.html

Polyurethane slurry pump impellers .We proudly manufacture quality Polyurethane slurry pump impellers and other replacement parts for some famous pump manufactures, which are 100% REVERSE INTERCHANGEABLE, no need to change your stock.Polyurethane slurry pump impeller (PUR and PU) is made by Polyurethane which is a polymer composed of a chain of org ...

http://http://www.sunbopump.com/Metal-Parts/Polyurethane-slurry-pump-impellers-285.html

E4110-A05 Slurry Pump Volute Liner is an important wear part of 6/4D-AH & 6/4E-AH slurry pumps. It forms a slurry pump chamber with throat bush and frame plate liner insert where the slurry would flow through them. Slurry volute Liner is a curved funnel increasing in area to the discharge port. It is often used with slurry pump impeller. As the ...

http://http://www.sunbopump.com/Metal-Parts/Gravel-Pump-Parts-Casing-286.html

Sunbo HS slurry pump is equivalent to warman AH Slurry Pump,It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosi ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/3x2-AH-slurry-pump-Centrifugal-slurry-pump-warman-287.html

Sunbo HS Series heavy duty horizontal slurry pump specially designed for continuous pumping of highly abrasive, dense slurry from hydrocyclone feed to regrinding, flotation and tailings in mineral processing plants slurry. HS slurry pump is the perfect Warman AH slurry pumps replacement at low cost. These pumps are designed for a wide range of eros ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/12X10-AH-Slurry-Pump-Mining-Centrifugal-Slurry-Pump-289.html

Sunbo HS slurry pump is equivalent to warman AH Slurry Pump,It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosi ...

http://http://www.sunbopump.com/Slurry-Pumps/Slurry-Pump/350HS-heavy-duty-centrifugal-slurry-pump-Sunbo-16x14-AH-Pump-290.html