The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing ...
http://http://www.sunbopump.com/Slurry-Pumps/HS-HHS-SL-MS-Series-Slurry-Pumps-120.html
ZJ series slurry pump is a type of single-stage, single-suction, horizontal, cantilevered, centrifugal slurry pump. The ZJ series pumps used international advanced solid-liquid two-phase flow theory and designed using the Minimum-Wear principle. ZJ series slurry pumps are widely used in mining ,metallurgy, power ,coalpetroleum, chemical and buildin ...
http://http://www.sunbopump.com/Slurry-Pumps/ZJ-Trash-Slurry-Pumps-121.html
ZGB(P) slurry pumps is horizontal cantilever single-stage, single-suction, double-case and high head of delivery centrifugal slurry pump. Series ZGB(P) UP-to-date generation Slurry Pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture. The series of pump has the advantages of r ...
http://http://www.sunbopump.com/Slurry-Pumps/ZGB-High-performance-Slurry-Pumps-122.html
The SF Froth Pump is of heavy duty construction, designed for continuous pumping of highly abrasive and corrosive frothy slurries. It has a vertical shaft configuration and comprise a hopper, with vertical Bearing Assembly, and Type 'HS' pump wet-end. It features a wide choice of replaceable abrasion resistant metal or moulded rubber casing liners ...
http://http://www.sunbopump.com/Froth-Pump/SF-Series-Froth-Pump-123.html
The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further ...
http://http://www.sunbopump.com/Gravel-Pump/SG-Horizontal-Centrifugal-Gravel-Pump-124.html
The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement w ...
http://http://www.sunbopump.com/Sump-Pump/SV-Series-Sump-Pump-125.html
OEM business is an important part of our business. Sunbo accept OEM business as samples or drawings of all kinds of pumps and casting spare parts. And more we offer ODM service too. We are experienced in anti-abrasion and anti-corrosion material spare parts business. The main material specifications as below: &nb ...
http://http://www.sunbopump.com/Other-Pumps/OEM-Pumps-129.html
The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...
http://http://www.sunbopump.com/Rubber-Parts/Slurry-Pump-Rubber-Impeller-132.html
The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...
http://http://www.sunbopump.com/Rubber-Parts/Rubber-Back-Liner-Wear-Parts-133.html
The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...
http://http://www.sunbopump.com/Rubber-Parts/Pump-Rubber-Front-Liner-Wear-Parts-134.html
The rubber wet parts are great wear resistance and corrosion resistance, usually used for acid working conditions. Such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bushing, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts are made of ...
http://http://www.sunbopump.com/Rubber-Parts/Slurry-Pump-Rubber-Throat-Bush-142.html
The HS series pumps are designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing ...
http://http://www.sunbopump.com/Slurry-Pumps/Metal-Lined-Slurry-Pumps-148.html
HHS series pump is designed for the continuous pumping of highly abrasive, high density slurries with high pressure. It is also called High Head Slurry Pump. The range is capable of handling heavy duty, medium size particles and pumping at heads in excess of 90 meters per stage. The small eye to impeller diameter ratio provides a combination that ...
http://http://www.sunbopump.com/Slurry-Pumps/High-Pressure-Centrifugal-Slurry-Pump-149.html
Specification: Capacity (m3/h): 12.6-28.8 Head (m): 6-68 Speed (r/min): 1200-3800 Max. Efficiency N-n%: 40 NPSH (m): 2-4 Allowable Max. Power (Kw): 15 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted ...
http://http://www.sunbopump.com/Slurry-Pumps/25HS-B-model-Small-Slurry-Pump-160.html
Specification: Capacity (m3/h): 32.4-72 Head (m): 6-58 Speed (r/min): 1200-3200 Max. Efficiency N-n%: 45 NPSH (m): 3.5-8 Allowable Max. Power (Kw): 15 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high ...
http://http://www.sunbopump.com/Slurry-Pumps/40HS-B-model-Ash-Slurry-Pump-161.html
Capacity (m3/h): 39.6-86.4 Head (m): 12-64 Speed (r/min): 1300-2700 Max. Efficiency N-n %: 55 NPSH (m): 4-6 Allowable Max. Power (Kw): 30 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chrome alloy, SA05, 27 ...
http://http://www.sunbopump.com/Slurry-Pumps/50HS-C-Model-Horizontal-Slurry-Pump-162.html
Specification: Capacity (m3/h): 7-36 Head (m): 5-38 Speed (r/min): 1000-2600 Max. Efficiency N-n%: 50 NPSH (m): 2-5 Allowable Max. Power (Kw): 15 Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the w ...
http://http://www.sunbopump.com/Slurry-Pumps/40HSR-B-model-ASH-Rubber-Slurry-Pump-163.html
Specification: Capacity (m3/h): 36-75.5 Head (m): 19-39 Speed (r/min): 1300-2100 Max. Efficiency N-n%: 55 NPSH (m): 2-4 Allowable Max. Power (Kw): 30 Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the wea ...
http://http://www.sunbopump.com/Slurry-Pumps/50HSR-C-Model-Horizontal-Rubber-Slurry-Pump-164.html
Specification: Capacity (m3/h): 86.4-198 Head (m): 9-52 Speed (r/min): 1000-2200 Max. Efficiency N-n%: 71 NPSH (m): 4-6 Allowable Max. Power (Kw): 30 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continu ...
http://http://www.sunbopump.com/Slurry-Pumps/75HS-C-model-high-quality-Slurry-Pump-165.html
Specification Capacity (m3/h): 162-360 Head (m): 12-56 Speed (r/min): 800-1550 Max. Efficiency N-n%: 65 NPSH (m): 5-8 Allowable Max. Power (Kw): 60 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pumping of highly abrasive ...
http://http://www.sunbopump.com/Slurry-Pumps/100HS-D-Model-Centrifugal-Slurry-Pump-166.html
Specification Capacity (m3/h): 70-324 Head (m): 10-40 Speed (r/min): 800-1350 Max. Efficiency N-n%: 71.5 NPSH (m): 2-6 Allowable Max. Power (Kw): 60 Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is th ...
http://http://www.sunbopump.com/Slurry-Pumps/100HSR-D-Model-Rubber-Slurry-Pump-167.html
Specification: Capacity (m3/h): 360-828 Head (m): 10-61 Speed (r/min): 500-1140 Max. Efficiency N-n%: 72 NPSH (m): 2-9 Allowable Max. Power (Kw): 120 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pump ...
http://http://www.sunbopump.com/Slurry-Pumps/150HS-E-Sunbo-Slurry-Pump-168.html
Specification: Capacity (m3/h): 612-1368 Head (m): 11-61 Speed (r/min): 400-850 Max. Efficiency N-n%: 71 NPSH (m): 4-10 Allowable Max. Power (Kw): 260 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. It is designed for the continuous pumping of highly abras ...
http://http://www.sunbopump.com/Slurry-Pumps/200HS-F-Slurry-Pump-169.html
Specification: Capacity (m3/h): 540-1188 Head (m): 7-45 Speed (r/min): 300-600 Max. Efficiency N-n%: 80 NPSH (m): 2.5-7.5 Allowable Max. Power (Kw): 560 Description: Pump Type HSR is the standard heavy duty slurry pumps which designed with rubber lined. The structure is similar to HS type pumps, main difference is the wear p ...
http://http://www.sunbopump.com/Slurry-Pumps/200HSR-Horizontal-Rubber-Slurry-Pump-170.html
Specification: Capacity (m3/h): 540-1440 Head (m): 14-60 Speed (r/min): 600-1000 Max. Efficiency N-n%: 73 NPSH (m): 4-10 Allowable Max. Power (Kw): 120 Description: MS type pumps were designed specifically for successive use in slurry type applications where a large flow at a low to medium developed head is required. T ...
http://http://www.sunbopump.com/Slurry-Pumps/200MS-E-Slurry-Pump-171.html
Specification: Capacity (m3/h): 936-1980 Head (m): 7-68 Speed (r/min): 300-800 Max. Efficiency N-n%: 82 NPSH (m): 6 Allowable Max. Power (Kw): 560 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chr ...
http://http://www.sunbopump.com/Slurry-Pumps/250HS-ST-Slurry-Pump-172.html
Specification: Capacity (m3/h): 1260-2772 Head (m): 13-63 Speed (r/min): 300-600 Max. Efficiency N-n%: 77 NPSH (m): 3-10 Allowable Max. Power (Kw): 560 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chro ...
http://http://www.sunbopump.com/Slurry-Pumps/300HS-ST-Slurry-Pump-173.html
Specification: Capacity (m3/h):2520-5400 Head (m): 13-57 Speed (r/min): 200-400 Max. Efficiency N-n%: 85 NPSH (m): 5-10 Allowable Max. Power (Kw): 1200 Description: The HS type pump is the single stage, end suction, cantilevered, heavy duty, horizontal centrifugal slurry pump. The wet parts components are casted of high chro ...
http://http://www.sunbopump.com/Slurry-Pumps/450HS-TU-Heavy-Duty-Slurry-Pump-174.html
Specification: Capacity (m3/h): 17-43.2 Head (m): 4-28.5 Speed (r/min): 1000-2200 Max. Efficiency N-n%: 40 Allowable Max. Power (Kw): 15 Standard Submerged Depth (mm): 900,1200 Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and p ...
http://http://www.sunbopump.com/Sump-Pump/40PV-SV-Model-Belt-Drive-Small-Sump-Pump-178.html
Specification: Capacity (m3/h): 18-114 Head (m): 5-31.5 Speed (r/min): 750-1500 Max. Efficiency N-n%: 60 Allowable Max. Power (Kw): 30 Standard Submerged Depth (mm): 900,1200,1500 Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty wa ...
http://http://www.sunbopump.com/Sump-Pump/65QV-SV-Model-Vertical-Slurry-Pump-179.html
Specification: Capacity (m3/h): 54-289 Head (m): 8.5-40 Speed (r/min): 500-1200 Max. Efficiency N-n%: 62 Allowable Max. Power (Kw): 75 Standard Submerged Depth (mm): 1200,1500,1800 Description: The vertical centrifugal slurry pumps are no submerged bearings or seals cantilevered pumps, which ideal for a variety of submerged ...
http://http://www.sunbopump.com/Sump-Pump/100RV-SVR-Model-Rubber-Lined-Sump-Pump-180.html
Specification: Capacity (m3/h): 360-1152 Head (m): 7-33 Speed (r/min): 400-750 Max. Efficiency N-n%: 60 Allowable Max. Power (Kw): 200 Standard Submerged Depth (mm): 1800,2100,2400 Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water a ...
http://http://www.sunbopump.com/Sump-Pump/250TV-SV-Model-Vertical-Spindle-Sump-Pump-181.html
Specification: Capacity (m3/h): 540-1548 Head (m): 2.5-26 Speed (r/min): 350-700 Max. Efficiency N-n%: 60 Allowable Max. Power (Kw): 200 Standard Submerged Depth (mm): 1800,2100,2400 Description: The vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water ...
http://http://www.sunbopump.com/Sump-Pump/300TV-SV-Model-Biggest-Sump-Pump-182.html
Sunbo HS slurry pump is equivalent to warman AH Slurry Pump, It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corros ...
Sunbo HS Series heavy duty horizontal slurry pumps specially designed for continuous pumping of highly abrasive, dense slurry from hydrocyclone feed to regrinding, flotation and tailings in mineral processing plants slurry. HS slurry pump is the perfect Warman AH slurry pumps replacement at low cost. These pumps are designed for a wide range of ero ...
The slurry pump impeller play an extremely important role in the operation of centrifugal slurry pump. By rotating, it can help slurry pump meet the needs of the equipment. The slurry pump impeller is easy to be worn out, so we search for the special materials to prolong the lifespan of impeller, high chrome white iron is one of them, aims at ...
http://http://www.sunbopump.com/Metal-Parts/Metal-Impeller-Wear-Parts-268.html
Sunbo HS slurry pump is equivalent to warman AH Slurry Pump,It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosi ...
Sunbo HS slurry pump is equivalent to warman AH Slurry Pump,It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosi ...
Sunbo HS Series heavy duty horizontal slurry pump specially designed for continuous pumping of highly abrasive, dense slurry from hydrocyclone feed to regrinding, flotation and tailings in mineral processing plants slurry. HS slurry pump is the perfect Warman AH slurry pumps replacement at low cost. These pumps are designed for a wide range of eros ...
Sunbo HS slurry pump is equivalent to warman AH Slurry Pump,It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, HS High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosi ...
