Sunbo SUPD series Centrifugal Pump is designed equivalent to BAKER SPD MUD HOG 2.5 Centrifugal Pumps. Typical Configuration: 2x3x13, 3x4x14, 4x5x14, 5x6x11, 6x8x11, 6x8x14, 8x10x14.
Common applications,
- Fresh water
- Sea water
-Drilling Mud
- Ash Slurry
Sunbo Centrifugal Pump Specifications:
Model | 6x8x14 | 6x8x11 | 5x6x14 | 5x6x11 | 4x5x14 | 3x4x13 | 2x3x13 |
Discharge capacity | 240-260 m3/h | 220-240 m3/h | 200-220 m3/h | 120-200 m3/h | 80-120 m3/h | 60-80 m3/h | 50-60m3/h |
Pump Head | 28-33m | 24-28m | 24-28m | 24-28m | 24-28m | 22-28m | 22-28m |
Efficiency | 65% | 65% | 65% | 65% | 65% | 65% | 65% |
Motor power | 55/75 kW | 37/45 kW | 37/45/55 kW | 30/37/45 kW | 18.5/22/30 kW | 11/15 kW | 7.5/11 kW |
Motor speed | 1450/1750rpm | 1450/1750rpm | 1450/1750rpm | 1450/1750rpm | 1450/1750rpm | 1450/1750rpm | 1450/1750rpm |
Feature and Specification:
> Size from 3 x 2 x 13 to 10 x 8 x 14
> Flow rates from a few gallons per minute up to 2600 GPM
> Head pressure up to 550 feet
> Best utilized requiring up to 200HP
> Revolutionary design on Baker SPD Mud Hog2.5 series
> Improved stability, lower vibration, cost saving
> Thick, strong, concentric casing with replaceable wear pad
> Wide semi-open impeller creates lower axial trust for improved the life of bearing, mechanical seal and stuffing box
> Available in hard iron, stainless steel, high chrome alloy and aluminum bronze fluid ends
> Available to be driven by electric motor, diesel engines, hydraulic motors
