Description
Sunbo magnum centrifugal pumps are designed for the widest drilling rig processing oil and gas industry. Mission Magnum I Pump 3x2x13 centrifugal pumps with gland packing seal /mechanical seal and stainless steel/ceramic shaft sleeve used on offshore rigs and land-based rigs.
Mission Magnum 1 Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3x2x13 to 8x6x14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission Magnum I type has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The MAGNUM I pump is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in hard iron, high chrome alloy, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Design Features:
• Up to 50% more capacity from the 8 x 6 pump
• Optimum pressure at low operating speeds
• Thicker casing to extend life from wear and corrosion
• New impeller design to reduce loads and extend bearing life
• Larger, stronger shaft to reduce deflection
• Larger, long-life bearings, make pump system running stable
• Replaceable stuffing box cover
• Smoother, non-turbulent flow throughout casing
Mission Magnum I Pumps Applications:
Magnum I type centrifugal pumps can be used in various of applications, like mud pumping, solids control, dredging, leveling or rig platform (ballast), barite, ferric oxide, mineral oil, base drilling muds, glass fibers, sugar processing, ash or coal conveyers, cement, mud cooling towers, underground construction, desanding and desilting, etc
Sunbo Mission Magnum Centrifugal Pump Parts List:
| Item | Qty | Part No. | Processing# | Description | Material |
| 1* | 1 | See below | See below | Casing | Hard iron |
| 1A | 1 | 10399-46-1 | 648403012 | Gasket,casing | Vellumoid |
| 1B | 12 | 3932-61 | 648402014 | Nut,casing | Stl |
| 1C | 12 | 3862-76 | 648401115 | Stud,casing | Stl |
| 1D | 1 | 8505/4/1 | 86485503 | Plug,Casing Drain | Stl |
| 1E | 1 | 8505/4/1 | 646400507 | Plug,flush line | Stl |
| 2* | 1 | See below | See below | Impeller | Hard iron |
| 2A | 1 | 19110-72 | 64845082 | Seal,impeller | Viton |
| 2B | 1 | 7300239 | Washer,impeller | Stl | |
| 2C | 1 | 7415648 | Bolt,impeller lock | Stl | |
| 3* | 1 | 22223-01-30 | 641116157 | Stuffing box,mech.seal | Hard iron |
| 3* | 1 | 20614-01-30 | 643365042 | Stuffing box,packed | Hard iron |
| 3A | 2 | 3861-117 | 648401016 | Bolt,stuffing box | Stl |
| 3B | 1 | 19368-01 | 601499403 | Grease fitting | Stl |
| 4 | 1 | 20622A | 641103338 | Gland assy,packing | Bronze |
| 5A# | 1 | 22451-1 | 648414308 | Seal,mechanical | Tungsten Carbide |
| 5A~ | 3 | 25014-04M-B | 661007005 | Packing, Shaft | Graphite/Acrylic |
| 6 | 2 | B3701A | 601102494 | Bolt assy,gland | Stl |
| 7 | 1 | 20612-02-33 | 646490557 | Shaft | AISI 4140 |
| 7A# | 1 | 20943-21 | 641102182 | Sleeve,shaft,M.S. | 416SS |
| 7A& | 1 | 20613-21G-7A | 641102181 | Sleeve,shaft,Pack | Ceramic |
| 7B | 1 | 4372/5/21 | 601212392 | Key,shaft | Stl |
| 7C | 1 | 23444-01-72 | 648415156 | Seal,shaft sleeve | Viton |
| 8 | 1 | 22210-1A | 641116108 | Deflector assembly | Bronze |
| 9 | 1 | 20618-12-1 | 644302499 | Frame,grease lubricated | Cast iron |
| 9A | 1 | May-05 | 601474737 | Plug,oil drain | Iron |
| 9B | 1 | 18471 | 648403608 | Plug,oil fil | Iron |
| 9C | 1 | May-05 | 601474737 | Plug, Frame Drain | Iron |
| 9D | 1 | Jan-67 | 601473689 | Breather | Stl |
| 9E | 1 | Mar-78 | 601174584 | Oiler Assembly | |
| 9F | 1 | A 662014131 | 662014131 | Dip Stick | Stl |
| 9G | 1 | 2538-1H | Bolt, Casing Jack | Stl | |
| 10A | 1 | 20626 | 644303109 | Cover,inboard bearing | Iron |
| 10B | 1 | 20625 | 648408706 | Gasket,I.B.Brg.Cover | Vegetable fiber |
| 10C | 1 | 20619-01 | 648408300 | Oil seal, I.B.Brg.Cover | Buna-n |
| 10D | 2 | Jan-61 | 601407505 | Bolt, I.B.Brg.Cover | Stl |
| 10E | 2 | Feb-32 | 601408560 | Nut, I.B.Brg.Cover | Stl |
| 10F | 1 | 20620-01 | 648408409 | Exclusion Seal, I.B. Brg. Cvr. | Buna-n |
| 10G | 1 | 21641-01 | 661010033 | Grease Fitting | Stl |
| 10H | 1 | 648411908 | Grease Fitting | Stl | |
| 11 | 1 | 20615-1 | ¨C | Bearing,inboard | Vendor |
| 12 | 1 | 20624-01-01 | 644308504 | Housing,O.B.bearing | Iron |
| 12A | 1 | 7496-253 | 648402295 | Seal, O.B.Brg.housing | Buna-n |
| 12B | 4 | 3861-138 | 648401057 | Bolts, O.B.Brg.housing | Stl |
| 12C | 2 | 3932-62 | 658404702 | Nut, O.B.Brg.housing jam | Stl |
| 13 | 1 | 20617-01-01 | 641103296 | Cover,O.B.Bearing | Iron |
| 13A | 1 | 19368-01 | 661010020 | Grease zerk, O.B.Brg.Cover | Stl |
| 13B | 1 | 7496-26 | 72200017 | O-ring, O.B.Brg.Cover | Buna-n |
| 13C | 1 | 20619-02 | 648408359 | Oil seal, O.B.Brg.Cover | Buna-n |
| 13D | 2 | 3861-139 | 648401081 | Bolt, O.B.Brg.Cover | Stl |
| 14 | 2 | 20616-1 | 648408201s | Bearing, O.B. | Vendor |
| 14A | 1 | Apr-24 | 648402105 | Lockwasher,O.B.Bearing | Stl |
| 14B | 1 | Apr-23 | 648402055 | Locknut, O.B.Bearing | Stl |
| CASINGS ( including studs, nuts and gaskets) | |||||
| Item | Qty | Part No. | Processing# | Description | Material |
| 1* | 1 | 19203-01-30A | 641101753 | Casing,3x2x13 | Hard iron |
| 1* | 1 | 19205-01-30A | 641101902 | Casing,4x3x13 | Hard iron |
| 1* | 1 | 19222-01-30A | 641102058 | Casing,5x4x14 | Hard iron |
| 1* | 1 | 19122-01-30A | 641101456 | Casing,6x5x11 | Hard iron |
| 1* | 1 | 19123-01-30A | 641101605 | Casing, 6x5x14 | Hard iron |
| 1* | 1 | 19763-01-30A | 641102157 | Casing, 8x6x11 | Hard iron |
| 1* | 1 | 19763-01-30A | 641101308 | Casing,8x6x14 | Hard iron |
| 1* | 1 | 20937-01-30A | 641102322 | Casing,10x8x14 | Hard iron |
| IMPELLERS | |||||
| Item | Qty | Part No. | Processing# | Description | Material |
| 2* | 1 | 19204-XX-30 | 641215603 | Impeller,3x2x13 | Hard iron |
| 2* | 1 | 19206-XX-30 | 641217005 | Impeller,4x3x13 | Hard iron |
| 2* | 1 | 19224-XX-30 | 641217831 | Impeller,5x4x14 | Hard iron |
| 2* | 1 | 19121-XX-30 | 641211602 | Impeller,6x5x11 | Hard iron |
| 2* | 1 | 19121-XX-30 | 641212105 | Impeller, 6x5x14 | Hard iron |
| 2* | 1 | 19121-XX-30 | 641211602 | Impeller, 8x6x11 | Hard iron |
| 2* | 1 | 19116-XX-30 | 641209903 | Impeller,8x6x14 | Hard iron |
Remarks: The above mentioned part number is used for helping customers fast confirmation only. We are not authorized to use these part numbers on any of our pump parts
